The 2x1 Solid Phase Extraction (SPE) Automated Labware Positioner (ALP) combines the vacuum manifold location and collar holder positions into a single ALP location on the deck. This creates room for more labware to be placed on the worksurface, allowing the Biomek to perform simultaneous processes, such as incubations, vacuum filtration and liquid transfer. This ALP is used in conjunction with 12-plate method and must be positioned on the right outer column of the Biomek.

Specifications

Platform Biomek FX

NOT ALL PRODUCTS ARE AVAILABLE IN ALL COUNTRIES
PRODUCT AVAILABILITY AND REGULATORY STATUS DEPENDS ON COUNTRY REGISTRATION PER APPLICABLE REGULATIONS

The listed regulatory status for products correspond to one of the below:
IVD: In Vitro Diagnostic Products. These products are labeled "For In Vitro Diagnostic Use."
ASR: Analyte Specific Reagents. These reagents are labeled "Analyte Specific Reagents. Analytical and performance characteristics are not established."
CE: Products intended for in vitro diagnostic use and conforming to European Directive (98/79/EC). (Note: Devices may be CE marked to other directives than (98/79/EC)
RUO: Research Use Only. These products are labeled "For Research Use Only. Not for use in diagnostic procedures."
LUO: Laboratory Use Only. These products are labeled "For Laboratory Use Only."
No Regulatory Status: Non-Medical Device or non-regulated articles. Not for use in diagnostic or therapeutic procedures.