Cell Counters & Analyzer Reagents

A variety of reagents that are designed for our cell counters and analyzer that optimize instrument setup, sample preparation and quality control. Use Vi-CELL controls and reagents for consistent and accurate analysis of simple cell systems or your own cell line.

Vi-CELL BLU Reagents

Automated detection of lot number, expiration date, on-board expiration, and remaining activities
Waste bottle included in reagent pak
High purity trypan blue reagent
Complete cleaning solution
Certificate of Analysis
Bottles and tray are recyclable

Vi-CELL BLU Quality Controls

Load-n-Go controls
Assigned assay values
Certificate of Analysis
Don’t have to worry about mixing, pipetting
QC for concentration, viability and size

Vi-CELL XR Reagents

High purity trypan blue reagent
Complete cleaning solution
Certificate of Analysis
Bottles are Recyclable

Vi-CELL MetaFLEX Solution Pack

The Vi-CELL MetaFLEX solution pack contains pouches with QC and calibration material, rinse solution, a gas mixture and closed containers to hold liquid and waste. It is easy-to-install with onscreen prompts. It is a complete solution of detection reagents and internal quality control.

Waste collection included
Certificate of Analysis
30 days in-use lifetime (or until solution pack is empty)
4 month shelf life
Storage temperature 2-25° C / 35-77° F

Vi-CELL MetaFLEX Sensor Cassette

The Vi-CELL MetaFLEX sensor cassette contains sensors for the tests (except for the oximetry and bilirubin tests). It uses thick-film sensor technology and miniaturized sensors to enable direct measurements of glucose and lactate from a 100 μL sample (65 μL sample plus 35 μL tare). Measure pH, pO2, pCO2, glucose, lactate, electrolytes and more parameters with the fast and efficient Vi-CELL MetaFLEX.

Good for 300 tests
In-use lifetime of 30 days (or until max number of tests)
Automatic QC
Shelf life of 4 months
Storage temperature of 2-8° C / 35-46° F

Vi-CELL Focus Controls

The Vi-CELL Focus Control is used during the autofocusing procedure when the system requires re-focusing. The focus control beads help the system refocus and offer a new recommended focus position. The cup of focus control is run similar to a sample run using the Vi-CELL carousel sample delivery method.

For use in the Vi-CELL BLU and Vi-CELL XR cell viability analyzers.

Assigned assay values
Certificate of Analysis
QC for Concentration

Added to cart