Optima MAX-TL
Product No:A95761
Uncomplicated, uncompromised performance! Reach the speeds you need for your separation demands with this compact, quiet and highly efficient tabletop ultracentrifuge. Packed with advanced technology yet simple to operate, the MAX-TL is designed as a total system, with the ultracentrifuges, rotors and labware manufactured and tested based on unique characteristics and interplay of dynamics to ensure optimal performance and safety. Spins at an incredible 120,000 RPM (with the TLN-120 Rotor), 657,000 x g.
The Max TL is compatible with existing TL-Series rotors and labware. Includes multilingual software available in nine languages, the most available in the industry, for more efficiency and error-free operation across the globe. An ultracentrifuge is capable of separating high-molecular-weight compounds, viruses and subcellular particles for study.
The Max TL is compatible with existing TL-Series rotors and labware. Includes multilingual software available in nine languages, the most available in the industry, for more efficiency and error-free operation across the globe. An ultracentrifuge is capable of separating high-molecular-weight compounds, viruses and subcellular particles for study.
Resources + Tools
Product Specifications
| Platform | Tabletop UCF |
| Maximum Speed | 120,000 RPM |
| Maximum g-Force | 657,000 xg |
| BioSafe | No |
| Acceleration | 10 acceleration profiles |
| Deceleration | 11 deceleration profiles |
| Timed Run | 99 min, 59 sec Continuous run, short run |
| Max Capacity Volume Range | 40.8 mL |
| Refrigeration System | Solid state (thermoelectric temperature control system with forced air, no coolant, no CFCs/ODCs) |
| Drive Type Cooling | Variable Frequency Induction Drive with rotor overspeed ID |
| Temperature Range(s) | 0 to 40°C in 1°C increments |
| Zonal Capability | False |
| Pollution Degree | 2 |
| Vacuum and Pump | Below 10 microns (1.34 Pa) |
| Installation Category | II |
| Display | Full-color LCD touchscreen |
| Finish | Coated Polycarbonate, Acrylic Baking Enamel, General Purpose Paint |
| Weight | 105 kg |
| Width | 73.9 cm |
| Depth | 61.7 cm |
| Height | 39.4 cm |
| Clearances | 7.6 cm: side & rear |
| Power Requirements | 100-120 VAC, 200-240 VAC, 50/60 Hz |
Related Products or Parts
TLA-100 Fixed-Angle Rotor Package
The TLA-100 is a fixed-angle titanium rotor designed for use in the Optima MAX, Optima MAX-XP, Optima TLX, and the discontinued TL-100 and Optima TL micro-ultracentrifuges. It has a tube angle of 30 degrees from the axis of rotation and can centrifuge up to 20 tubes.
TLA-100 Fixed-Angle Rotor
The TLA-100 is a fixed-angle titanium rotor designed for use in the Optima MAX, Optima MAX-XP, Optima TLX, and the discontinued TL-100 and Optima TL micro-ultracentrifuges. It has a tube angle of 30 degrees from the axis of rotation and can centrifuge up to 20 tubes.
TLS-55 Swinging-Bucket Rotor Package
The TLS-55 is a swinging-bucket rotor that holds four tubes, designed for use in Beckman Coulter Optima MAX, Optima MAX-XP, Optima TLX, and TL-100 micro-ultracentrifuges.
TLS-55 Swinging-Bucket Rotor
The TLS-55 is a swinging-bucket rotor that holds four tubes, designed for use in Beckman Coulter Optima MAX, Optima MAX-XP, Optima TLX, and TL-100 micro-ultracentrifuges.
TLA-100.3 Fixed-Angle Rotor
The TLA-100.3 is a fixed-angle titanium rotor designed for use in the Optima MAX, Optima MAX-XP, Optima TLX, and the discontinued TL-100 and Optima TL micro-ultracentrifuges. It has a tube angle of 30 degrees from the axis of rotation and can centrifuge up to 6 tubes.
TLA-100.3 Fixed-Angle Rotor Package
The TLA-100.3 is a fixed-angle titanium rotor designed for use in the Optima MAX, Optima MAX-XP, Optima TLX, and the discontinued TL-100 and Optima TL micro-ultracentrifuges. It has a tube angle of 30 degrees from the axis of rotation and can centrifuge up to 6 tubes.
TLN-100 Near-Vertical Rotor Package, 100.000 rpm, 450.000 x g, 8 x 3.9 mL
TLN-100 Rotor Package, NVT Near-Vertical Rotor, 9 deg Angle, Titanium.
Major applications: Plasmid DNA separations in 4 hours. Note: Non-precipitating solutions up to 1.7 g/mL in density can be run in this rotor without a reduction in rotor speed.
For use in the Optima MAX-XP Benchtop Ultracentrifuge, Optima TLX personal micro-ultracentrifuges, and Optima MAX high-capacity personal micro-ultracentrifuges, and the discontinued TL-100 and Optima TL micro-ultracentrifuges.
TLA-120.1 Fixed-Angle Rotor Package
Major applications: Pelleting of subcellular fractions in 5-30 minutes; plasmid DNA separation in 3 hours. For use in the Optima MAX-XP Benchtop Ultracentrifuge, Optima TLX personal micro-ultracentrifuges, Optima MAX high-capacity personal micro-ultracentrifuges, and the discontinued TL-100 and Optima TL personal micro-ultracentrifuges.
TLA-120.2 Fixed-Angle Rotor Package
The TLA-120.2 is a fixed-angle titanium rotor designed for use in the Optima MAX, Optima MAX-XP, Optima TLX, and the discontinued TL-100 and Optima TL micro-ultracentrifuges. It has a tube angle of 30 degrees from the axis of rotation and can centrifuge up to 10 tubes.
TLN-120 Near-Vertical Rotor Package
The TLN-120 is a near-vertical tube rotor with a tube angle of 8 degrees from the axis of rotation and can centrifuge up to eight 8 x 35-mm (1.2 mL) Quick-Seal tubes. Designed for use in Beckman Coulter Optima MAX, Optima MAX-XP, Optima TLX, and TL-100 tabletop ultracentrifuges.
TLN-120 Near-Vertical Rotor
The TLN-120 is a near-vertical tube rotor with a tube angle of 8 degrees from the axis of rotation and can centrifuge up to eight 8 x 35-mm (1.2 mL) Quick-Seal tubes. Designed for use in Beckman Coulter Optima MAX, Optima MAX-XP, Optima TLX, and TL-100 tabletop ultracentrifuges.
TLA-120.2 Fixed-Angle Rotor
TLA-120.2 Rotor Assembly, Fixed-Angle, Titanium. Major Applications: Pelleting of subcellular fractions in 5-30 minutes, plasmid DNA separations in 3 hours. Note: Non-precipitating solutions up to 1.7 g/mL in density can be run in this rotor without a reduction in rotor speed. For use in Optima MAX-XP Benchtop Ultracentrifuge, Optima TLX personal micro-ultracentrifuges, Optima MAX high-capacity personal micro-ultracentrifuges, and the discontinued TL-100 and Optima TL-100 personal micro-ultracentrifuges.
TLA-120.1 Fixed-Angle Rotor
The TLA-120.1 is a fixed-angle titanium rotor designed for use in the Optima MAX, Optima MAX-XP, Optima TLX, and the discontinued TL-100 and Optima TL micro-ultracentrifuges. It has a tube angle of 30 degrees from the axis of rotation and can centrifuge up to 14 tubes.
TLA-55 Fixed-Angle Rotor Package
TLA-55 Rotor Package, Fixed-Angle (45 deg Angle), Aluminum. Major Applications: Rapid pelleting of nucleic acid precipitates in 1.5 mL tubes. For use in the Optima MAX-XP Benchtop Ultracentrifuge, Optima TLX personal micro-ultracentrifuges, and Optima MAX high-capacity personal micro-ultracentrifuges, and the discontinued TL-100 and Optima TL micro-ultracentrifuges.
