Avanti J-E Series

Easily perform separations with the compact Avanti® J-E high-speed centrifuge. The Avanti J-E is uniquely designed to achieve a high degree of separation, and offer outstanding high-speed performance in a compact design.

  • 4.0L max capacity
  • 21,000 RPM
  • 53,300 x g

Features

Reduction in Experiment Time

  • A faster acceleration/deceleration selection menu provides time savings during protocol runs
  • Optimized surface height and contoured front panel allow for easy rotor installation and retrieval
  • Switched reluctance (SR) drive technology for shorter wait times

Sample Protection

  • Set and control temperature to maintain sample integrity
  • Extensive rotor library for safe sample transportation
  • Application benefits from efficient hardware and supplies

Design and Safety

  • All the power you need – even in the tightest lab spaces
  • Low-speed automated rotor identification with auto-reset for operational safety

Energy Savings

  • A lower heat output provides energy efficiency
  • Maintenance-free vacuum reduces rotor friction reducing energy use

Product Specifications

Max Speed 21,000 rpm
Max g Force 53,300.00 x g
BioSafe Yes
Acceleration 2 profiles, Maximum (full accleration to set speed) & Slow
Deceleration 3 profiles (max, slow & off (coast)
Speed Control ± 50 actual rotor speed, ±50 rpm of set speed
Timed Run 1 min to 99:59 hrs, Hold
Max Capacity Volume Range 1 x 4 L
Refrigeration System Non-CFC, non-ozone depleting refrigerant
Max Heat Dissipation 2 kW (6,900 BTU/hr)
Temperature Control ± 2 ° C °C of set temperature after equilibration
Drive Type Cooling Air-cooled
Time (Actual Display) Indicates estimated run time remaining (timed run), or elapsed time (hold run)
Temperature Range(s) 10°C - 40°C in 1 degree increments
Rotor Chamber Diameter cm / in
Item Specifications Referenced 369001