Avanti® J-30I BioSafe Centrifuge, 50/60Hz, 200/208/240 V

Product No:A20691

Accelerate sample processing with the maximum g-force in a high-speed centrifuge. The J30I BioSafe Centrifuge achieves the fastest separations possible in the shortest time, with high performance. Samples spend more time at full force and less time in the centrifuge. The swinging-bucket and fixed-angle rotors provide maximum separation forces over 100,000 x g at speeds up to 30,000 RPM. The acceleration and deceleration rates of the J-30I are unmatched. Maximum capacity is 4.0L. Includes a HEPA (high-efficiency particulate arrestance) filter kit, which makes this instrument BioSafe.

Product Specifications

Platform Avanti
Maximum Speed 30,000 rpm
BioSafe Bio-Enhanced
Acceleration 12 minutes
Deceleration 13 minutes
Speed Control ± 10 rpm of set speed or 0.15%, whichever is greater
Timed Run 1 minute-99 hours, 59 minutes; Hold or Ω 2t
Max Capacity Volume Range 1 - 4 L
Refrigeration System Non-CFC, non-ozone depleting refrigerant
Drive Type Cooling Air-cooled
Temperature Range(s) From -20°C to 40°C in 1° increments
Rotor ID Automatic
Friction Reduction System Yes
Zonal Capability Yes
Pollution Degree 2
Imbalance Tolerance ±
Environmental Conditions -20°C to 40°C in 1° increments
Installation Category II
Software Virtual Network Computing (VNC), Mobile Fuge app for Apple iOS and Android
Material(s) Steel, Structural Foam
Finish Powder Coat Paint
Weight 310 kg(683.4 lb)
Width 71 cm(28 in)
Depth 86 cm(33.9 in)
Height 86 cm (141 cm with door open)
Clearances 7.6 cm (sides) & 16 cm (rear)
Humidity Restrictions < 95% non-condensing
Power Requirements 200/208/240 V, 50/60 Hz

Customers Also Viewed