Shaking Peltier ALP

A93942

$13,600.00


Includes one Shaking Peltier Automated Labware Positioner (ALP) with two labware adapters (one 96-well PCR (Polymerase Chain Reaction), one 384-well PCR, and a flat adapter installed on the unit). The ALP permits heating or cooling of one labware position for a software controlled set point between 4° C and 70° C in 0.1° C increments using the Flat Bottom Plate adapter. Use of the 96- or 384-well PCR adapter will reduce the available temperature range. The device shakes from 100 to 1400 rpm, with an amplitude of 2 mm, and is equipped with an automatic startup routine to avoid sample spillage. This peltier occupies a single ALP position and requires an off-deck controller (included). This ALP requires one open USB port for software control. For use on the Biomek 3000 NX / NXp or FX / FXp liquid handler. Additional accessories required: A31591 side-bracket mount (holds two Peltier ALPs) and A31593 stand-off feet (one required per Biomek 3000 liquid handler)

Specifications

Package Quantity 1
Platform Biomek 3000

NOT ALL PRODUCTS ARE AVAILABLE IN ALL COUNTRIES
PRODUCT AVAILABILITY AND REGULATORY STATUS DEPENDS ON COUNTRY REGISTRATION PER APPLICABLE REGULATIONS

The listed regulatory status for products correspond to one of the below:
IVD: In Vitro Diagnostic Products. These products are labeled "For In Vitro Diagnostic Use."
ASR: Analyte Specific Reagents. These reagents are labeled "Analyte Specific Reagents. Analytical and performance characteristics are not established."
CE: Products intended for in vitro diagnostic use and conforming to European Directive (98/79/EC). (Note: Devices may be CE marked to other directives than (98/79/EC)
RUO: Research Use Only. These products are labeled "For Research Use Only. Not for use in diagnostic procedures."
LUO: Laboratory Use Only. These products are labeled "For Laboratory Use Only."
No Regulatory Status: Non-Medical Device or non-regulated articles. Not for use in diagnostic or therapeutic procedures.