Avanti® J-HC High Capacity Centrifuge, 50/60 Hz, 200/208/240 V

367501

Request A Quote

Avanti JHC
Efficiency, convenience and total control. The J-HC High Capacity Centrifuge provides you with a complete solution for batch bioprocessing with performance and biocontainment capabilities beyond high-speed or super-speed centrifuges. Spin a maximum of nine liters at speeds of 5,000 RPM and 7,480 x g for greater sample throughput. Process up to 36 liters per hour when harvesting bacteria. Enhanced operator safety is provided with disposable HarvestLine System Liners. The J-HC includes a high-torque, energy efficient drive for the fastest acceleration and deceleration possible with gentle precision. Also, advanced programmability, automatic rotor identification and imbalance safety check, CFC-free refrigerants, Friction Reduction System (FRS) for optimum temperature control, low energy consumption and low heat output. Includes Paperless documentation, data management, and current good manufacturing practice (CGMP) compliance with the Spintrace II network software. The J-HC is the highest capacity centrifuge in its class and provides the fastest accel and decel times with exclusive Switched Reluctance (SR) Drive technology.

Specifications

Platform Avanti
Maximum Speed 10,000 rpm
Maximum g-Force ||17,100.00|x g
BioSafe No
Acceleration Maximum or Slow
Deceleration Maximum, Slow, Timed (1-10 minutes from 500-0 rpm) or Off
Speed Control 25 x <i>g</i>-force control sets speed to nearest ± 50 rpm
Timed Run 1 min to 99 hrs, 59 mins (timed run); Total centrifuge effect (g-seconds) or Continuous hold
Max Capacity Volume Range 1 - 9 L
Refrigeration System Non-CFC, non-ozone depleting refrigerant
Temperature Range(s) 10°C - 40°C in 1 degree increments
Pollution Degree 2
Environmental Conditions -10°C to 40°C in 1° increments
Installation Category II
Software Virtual Network Computing (VNC), Mobile Fuge app for Apple iOS and Android
Material(s) Steel, Structural Foam
Finish Polycabonate overlay on top of surface door, Powder Coat Paint
Weight 300 kg / 661.4 lb
Width 71 cm / 28 in
Depth 86 cm (102.0 cm with air direviter extending)
Height 86 cm (152 cm with door open)
Clearances 7.6 cm (sides) & 16 cm (rear)
Humidity Restrictions < 95% (non-condensing)
Power Requirements 200/208/240 V, 50/60 Hz

Related Products or Parts

Quick View

JA-10 Fixed-Angle Aluminum Rotor- 6 x 500 mL, 10,000 rpm, 17,700 x g

$10,500.00

Quick View

J-LITE® Fixed-Angle Aluminum JLA-8.1000 Rotor with Polypropylene Bottles- 6 x 1,000 mL, 8,000 rpm, 15,970 x g

$21,200.00

Quick View

J-LITE JLA-8.1000 Fixed-Angle Aluminum Rotor- 6 x 1,000 mL, 8,000 rpm, 15,970 x g

$20,400.00

Quick View

J-LITE® Fixed-Angle Aluminum JLA-8.1000 Rotor with Polycarbonate Bottles- 6 x 1,000 mL, 8,000 rpm, 15,970 x g

$21,200.00

JS-4.2 Swinging-Bucket Aluminum Rotor and Buckets Quick View

JS-4.2 Swinging-Bucket Aluminum Rotor and Buckets

$11,900.00

JS-5.0 Swinging-Bucket Rotor Package Quick View

JS-5.0 Swinging-Bucket Rotor Package

$17,400.00


Customers Also Viewed

NOT ALL PRODUCTS ARE AVAILABLE IN ALL COUNTRIES
PRODUCT AVAILABILITY AND REGULATORY STATUS DEPENDS ON COUNTRY REGISTRATION PER APPLICABLE REGULATIONS

The listed regulatory status for products correspond to one of the below:
IVD: In Vitro Diagnostic Products. These products are labeled "For In Vitro Diagnostic Use."
ASR: Analyte Specific Reagents. These reagents are labeled "Analyte Specific Reagents. Analytical and performance characteristics are not established."
CE: Products intended for in vitro diagnostic use and conforming to European Directive (98/79/EC). (Note: Devices may be CE marked to other directives than (98/79/EC)
RUO: Research Use Only. These products are labeled "For Research Use Only. Not for use in diagnostic procedures."
LUO: Laboratory Use Only. These products are labeled "For Laboratory Use Only."
No Regulatory Status: Non-Medical Device or non-regulated articles. Not for use in diagnostic or therapeutic procedures.