Multisizer 4e COULTER COUNTER® Particle Analyzer

B23005


The Multisizer 4e Coulter Counter is a highly versatile particle counting and characterization system using the Coulter Principle. The product availability and regulatory status depends on country registration per applicable regulations. This part number comes with a 100μm aperture tube.

Specifications

Platform Other PC
Performance Aperture current accuracy ± 0.4% of setting; Polarity error less than 0.5%
Industry Standards 21 CFR Part 11
Max Capacity Volume Range 4 - 400 mL
Particle Size Analysis Range 0.20|1,600.00|μm in diameter
Sample Volume 0.004 μm^3 to 2.145 x 10^9 fL or μm^3
Fluid Compatibility All aqueous and non-aqueous electrolyte solutions devised for use with aperture technology are suitable for use with the Multisizer 4e. Electrolytes should be compatible with glass, fluoropolymers, fluoroelastomers, and stainless steel.
Linearity Linearity for 2% - 60% of aperture diameter: ± 1% for diameter, ± 3% for volume
Aperture Diameter Range 10.00|µm to 2,000.00|µm apertures (nominal diameter)
Digital Pulse Processor Proprietary high-speed digitization of the signal
Volumetric Mode Continuously selectable from 50 µL-2,000 µL
Volumetric Pump Accuracy >99.5%
Environmental Conditions Safe for indoor use only, Maximum altitude: 2000 m
Installation Category II
Temperature Range 5°C - 40°C
Humidity Restrictions 10%-80% (non-condensing)
Power Requirements 100-120 VAC; 230-240 VAC ±10%; single phase; 47 to 63 Hz inclusive; Power less than 55 VA (watts)
Operating System Windows® 7
Software Software for processing data for industrial, biological, and quality control applications
Resolution User-selectable
Display 20.1" Matrix LC Display with USB Cable
Operating Mode(s) Digital pulse processor
Pollution Degree 2
Weight 45 kg / 99.2 lb
Width 64 cm / 25.2 in
Depth 61 cm / 24 in
Height 51 cm / 20.1 in
Color Beige
Package Quantity 1
Customers Also Viewed

NOT ALL PRODUCTS ARE AVAILABLE IN ALL COUNTRIES
PRODUCT AVAILABILITY AND REGULATORY STATUS DEPENDS ON COUNTRY REGISTRATION PER APPLICABLE REGULATIONS

The listed regulatory status for products correspond to one of the below:
IVD: In Vitro Diagnostic Products. These products are labeled "For In Vitro Diagnostic Use."
ASR: Analyte Specific Reagents. These reagents are labeled "Analyte Specific Reagents. Analytical and performance characteristics are not established."
CE: Products intended for in vitro diagnostic use and conforming to European Directive (98/79/EC). (Note: Devices may be CE marked to other directives than (98/79/EC)
RUO: Research Use Only. These products are labeled "For Research Use Only. Not for use in diagnostic procedures."
LUO: Laboratory Use Only. These products are labeled "For Laboratory Use Only."
No Regulatory Status: Non-Medical Device or non-regulated articles. Not for use in diagnostic or therapeutic procedures.