The Multisizer 3 COULTER COUNTER is the most versatile particle size analyzer available today for a multitude of size range materials. It provides size and volume distributions in number, volume, surface area and mass, with an overall range of 0.4 micro-1200 micro. The Multisizer 3 uses The Coulter Principle (Electrical Sensing Zone Method) to measure particle volume, a direct measurement of a physical property of the particle. While retaining and enhancing the analogs circuits developed and refined by Coulter over many years, the Multisizer 3 incorporates the latest advances in electronics using state-of-the-art digitizing circuits. High-speed digitalization of the signal allows the use of pulse area analysis and other techniques for additional particle characterization. The resulting measurement data can be analyzed and formatted in numerous ways, or stored and re-analyzed at a later date with no need to analyze the sample again. The measurement data for each particle analyzed is stored. The instrument automatically corrects for coincidence. For biological or industrial applications, in quality control or research, the Multisizer 3 you will get the high-resolution and accuracy you demand.

Specifications

Platform Other PC
Humidity Restrictions 10%-80% (non-condensing)
Temperature Range 10°C - 40°C
Environmental Conditions Safe for indoor use only
Power Requirements 100-240 VAC, 50/60 Hz, 50 W (65 W max)
Weight 34.00|kg / 74.9571691428584|lb
Width 43.00|cm / 16.9291338582677|in
Depth 64.00|cm / 25.1968503937008|in
Height 45.00|cm / 17.7165354330709|in

Technical Documents

NOT ALL PRODUCTS ARE AVAILABLE IN ALL COUNTRIES
PRODUCT AVAILABILITY AND REGULATORY STATUS DEPENDS ON COUNTRY REGISTRATION PER APPLICABLE REGULATIONS

The listed regulatory status for products correspond to one of the below:
IVD: In Vitro Diagnostic Products. These products are labeled "For In Vitro Diagnostic Use."
ASR: Analyte Specific Reagents. These reagents are labeled "Analyte Specific Reagents. Analytical and performance characteristics are not established."
CE: Products intended for in vitro diagnostic use and conforming to European Directive (98/79/EC). (Note: Devices may be CE marked to other directives than (98/79/EC)
RUO: Research Use Only. These products are labeled "For Research Use Only. Not for use in diagnostic procedures."
LUO: Laboratory Use Only. These products are labeled "For Laboratory Use Only."
No Regulatory Status: Non-Medical Device or non-regulated articles. Not for use in diagnostic or therapeutic procedures.