MET ONE 6005 Remote, Down Exhaust, Analog Interface, No Flow Meter


The MET ONE 6005 offers accurate and reliable continuous particle monitoring. With a sensitivity range of 0.3 to 10 μm, data accuracy and repeatability through ISO 21501 compliant calibration, the 6005 meets the specific needs of cleanroom operations within the pharmaceutical, semiconductor, hard disk drive and flat panel display industries. The 6005 is easy to integrate into any facility monitoring system. The long-life laser diode means years of service between replacement parts, plus industry leading diagnostic features that reduce troubleshooting time and related downtime costs.

Details of this version include a flow rate of 0.1 CFM (2.83 LPM), sensitivity 0.5 μM at 0.1 CFM (2.83 LPM) and a range of 0.3 μM to 10.0 μM at 0.1 CFM (2.83 LPM). Counting efficiency is 50% (± 20%) for 0.5 μM (100% ± 10% at 1.5 times the minimum sensitivity). Fully complies with ISO21501-4. Output is analog 4–20 mA. Includes aa ASSY upgrade. Includes down exhaust (no flow) and aa ASSY upgrade.


Platform APC Instruments
Performance ISO 21501-4 unit-to-unit accuracy & reproducibility
Industry Standards ISO 21501-4 , ISO 14644-1:2015, FCC, CE
Light Source Long Life Laser™ Diode
Particle Size Analysis Range 0.5 - 10 μm
Flow Rate 2.83 L per minute
Coincidence Loss 10% at 140,000,000 particles /m³
Sample Volume 10 µm
Throughput 2.83 L per minute
Interfaces & Protocols Analog 4-20 mA, Pulse
Data Storage 1,000 samples (oldest records overwritten when buffer is full)
Zero Count ISO 21501-4 & JIS B 9921 (1 count or less in 5 min; 95% UCL)
Count Alarms, Display & Cycles User-defined alarm counts displayed via LED on box or remote LED
Environmental Conditions Indoor Environment
Temperature Range Operating temperature range: 10°C to 32°C, Storage temperature range: -40 to +70°C
Humidity Restrictions 5% - 85% (non-condensing)
Power Requirements 9 to 28 VDC, 3.5 W
Software Integrates with various software platforms for facility monitoring
Operating Modes Remote software-controlled sampling
Autoclavable No
Nonpyrogenic Yes
Weight 0.8 kg(1.8 lb)
Width 13.6 cm(5.4 in)
Depth 8.9 cm(3.5 in)
Height 12.1 cm(4.8 in)
Color Silver
Package Quantity 1

Customers Also Viewed


The listed regulatory status for products correspond to one of the below:
IVD: In Vitro Diagnostic Products. These products are labeled "For In Vitro Diagnostic Use."
ASR: Analyte Specific Reagents. These reagents are labeled "Analyte Specific Reagents. Analytical and performance characteristics are not established."
CE: Products intended for in vitro diagnostic use and conforming to European Directive (98/79/EC). (Note: Devices may be CE marked to other directives than (98/79/EC)
RUO: Research Use Only. These products are labeled "For Research Use Only. Not for use in diagnostic procedures."
LUO: Laboratory Use Only. These products are labeled "For Laboratory Use Only."
No Regulatory Status: Non-Medical Device or non-regulated articles. Not for use in diagnostic or therapeutic procedures.