LS 13 320 XR Particle Size Analyzer Multiwavelength
|Light Source||Diffraction: Solid-state (780 nm) PIDS: Tungsten lamp with high-quality band-pass filters (450, 600 and 900 nm)|
|Calibration Intervals and Options||One time onsite installation calibration|
|Particle Size Analysis Range||10 nm - 3,500 µm|
|Fluid Compatibility||Emulsions, Suspensions, Powders|
|Temperature Range||10°C - 40°C|
|Humidity Restrictions||0 - 90% without condensation|
|Power Requirements||6A at 90-125 VAC, 3 A at 220-240 VAC|
|Operating System||Microsoft OS|
|Resolution||50% peak-to-peak in mixtures|
|Weight||23.5 kg(51.8 lb)|
|Width||94 cm(37 in)|
|Depth||25.4 cm(10 in)|
|Height||49.5 cm(19.5 in)|
NOT ALL PRODUCTS ARE AVAILABLE IN ALL COUNTRIES
PRODUCT AVAILABILITY AND REGULATORY STATUS DEPENDS ON COUNTRY REGISTRATION PER APPLICABLE REGULATIONS
The listed regulatory status for products correspond to one of the below:
IVD: In Vitro Diagnostic Products. These products are labeled "For In Vitro Diagnostic Use."
ASR: Analyte Specific Reagents. These reagents are labeled "Analyte Specific Reagents. Analytical and performance characteristics are not established."
CE: Products intended for in vitro diagnostic use and conforming to European Directive (98/79/EC). (Note: Devices may be CE marked to other directives than (98/79/EC)
RUO: Research Use Only. These products are labeled "For Research Use Only. Not for use in diagnostic procedures."
LUO: Laboratory Use Only. These products are labeled "For Laboratory Use Only."
No Regulatory Status: Non-Medical Device or non-regulated articles. Not for use in diagnostic or therapeutic procedures.