The Avanti 1L Bottles and HarvestLine System Liners
Potential That Can’t Be Contained

Talk to a Centrifugation Expert

The Avanti 1L Bottles: Your Capacity Will Never Be the Same

The Avanti 1L polypropylene and polycarbonate bottles build upon the versatility of the Avanti Series of centrifuges to help you gain even more control of your workflow.

HarvestLine System Kit
  1. Less wasted sample
    There’s now no need to spin at the maximum bottle fill volume; our 1L bottles now support partial fills from 500 mL!
  2. Higher speeds and temperatures
    Achieves 8,000 rpm in the JLA‑8.1000 rotor, and 9,000 rpm in the JLA‑9.1000 rotor. Offers a maximum operating temperature of 38° C.
  3. Improved chemical resistance
    New polyetherimide AutoVent plug and polyphenylene sulfide cap provide greater chemical resistance.
  4. Easy handling
    With a diameter of 76 millimeters, the wide-mouth of this bottle allows easy access for removing pellets and cleaning. The cap handle and carrier simplify transport, and the cap is easily tightened.
  5. Patented HarvestLine System liners
    Single-use liners provide easy-to-use, low-cost sample containment, and are compatible with commonly used chemicals and solvents.
  6. Improved BioSafety*
    A protective O-ring provides better containment. Head space on the top of the bottle also helps prevent leakage. Plus, the bottles are BioCertified* when used with our JLA 8.1000 or JLA 9.1000 rotor and canisters.

Manufactured in an ISO certified facility under the ISO 9001 guidelines, this bottle material meets U.S. Pharmacopeia criteria for Class VI plastics.


1L HarvestLine System Liners: Even More Efficient Harvesting

With the 1L HarvestLine System liners, you can safely harvest high-quality samples in fewer steps from prep to cleanup. Watch the video to see how the system is used:

 

Benefits of the Single-Use Liners

Optimize lab safety and efficiency

  • Prevent contamination
  • Reduce exposure to potentially hazardous biologics
  • Reduce repetitive motions
  • Prevent liquid spillage
  • Reduce needed storage space

Accelerate your workflows

  • Achieve maximum sample yield
  • Minimize non-value-added tasks e.g., bottle cleaning, autoclaving, scraping
  • Expedite freeze/thaw lysing

Use for different applications

  • Harvesting bacterial and yeast cultures
  • Lysate clarification
  • Isolation or recovery of vaccine components
  • Cell and debris sedimentation
  • Protein separations etc.

The Journey of the Avanti 1L Bottle

The journey of the Avanti 1-liter bottle

Ordering Information

Part No. Description
Bottles
C31597 Polypropylene Bottle Assembly (set of 2): two 1L bottles, two caps/closures (PPS), two Autovent plugs (PEI), two large plug O-rings, two small Autovent O-rings.
Nominal Bottle Size: 95x191 mm, Open Mouth Tube Diameter: 76 mm, Spin Temperature: 2 to 38° C, Rotors: JLA-8.1000/9.1000.
C31600 Polycarbonate Bottle Assembly (set of 2): two 1L bottles, two caps/closures (PPS), two Autovent plugs (PEI), two large plug O-rings, two small Autovent O-rings.
Nominal Bottle Size: 95x191 mm, Open Mouth Tube Diameter: 76 mm, Spin Temperature: 2 to 38° C, Rotors: JLA-8.1000/9.1000.
A98814 1L Polypropylene Bottle (set of 2)
Nominal Bottle Size: 95x191 mm, Open Mouth Tube Diameter: 76 mm, Spin Temperature: 2 to 38° C, Rotors: JLA-8.1000/9.1000.
366751 1L Polycarbonate Bottle (set of 2)
Nominal Bottle Size: 95x191 mm, Open Mouth Tube Diameter: 76 mm, Spin Temperature: 2 to 38° C, Rotors: JLA-8.1000/9.1000.
HarvestLine System Liners
369256 1L HarvestLine System Liner, non-sterile (120 ea)
Material: Polyurethane, USP 23 Class 6, Spin Temperature: 4 to 10 °C, Run Time: up to 20 min, Storage Temperature: -80° C, Rotors: JLA-8.1000/9.1000.
C15216 1L HarvestLine System Liner, non-sterile (6 ea)
Material: Polyurethane, USP 23 Class 6, Spin Temperature: 4 to 10 °C, Run Time: up to 20 min, Storage Temperature: -80° C, Rotors: JLA-8.1000/9.1000.
C15217 1L HarvestLine System Liner, sterile (6 ea)
Material: Polyurethane, USP 23 Class 6, Spin Temperature: 4 to 10 °C, Run Time: up to 20 min, Storage Temperature: -80° C, Rotors: JLA-8.1000/9.1000.
Fill out the form to talk to an expert or request a quote