A1000 S20P Portable TOC analyser for Ultrapure Water
$30,100.00 List Price - $30,100.00
|Industry Standards||EP <2.2.44>, USP <643> (including Sterile Water SST)|
|Calibration Intervals and Options||3-point TOC calibration; Conductivity calibration to USP<645>; System suitability to USP, EP and JP|
|Temperature Range||5°to 95°C sample range|
|Power Requirements||86 to 264VAC +/-10%, 50/60Hz, Max 2 Amps|
|Operating Modes||Online TOC|
|Weight||6.5 kg / 14.3 lb|
|Width||330 mm / 13 in|
|Depth||112 mm / 4.4 in|
|Height||174 mm / 6.8 in|
NOT ALL PRODUCTS ARE AVAILABLE IN ALL COUNTRIES
PRODUCT AVAILABILITY AND REGULATORY STATUS DEPENDS ON COUNTRY REGISTRATION PER APPLICABLE REGULATIONS
The listed regulatory status for products correspond to one of the below:
IVD: In Vitro Diagnostic Products. These products are labeled "For In Vitro Diagnostic Use."
ASR: Analyte Specific Reagents. These reagents are labeled "Analyte Specific Reagents. Analytical and performance characteristics are not established."
CE: Products intended for in vitro diagnostic use and conforming to European Directive (98/79/EC). (Note: Devices may be CE marked to other directives than (98/79/EC)
RUO: Research Use Only. These products are labeled "For Research Use Only. Not for use in diagnostic procedures."
LUO: Laboratory Use Only. These products are labeled "For Laboratory Use Only."
No Regulatory Status: Non-Medical Device or non-regulated articles. Not for use in diagnostic or therapeutic procedures.