Fits onto Biomek FXp Standard Automated Labware Positioner (ALP) to hold various-sized polystyrene and polypropylene tubes, Microfuge tubes and cryovials. To ensure proper tube fit, inserts must be used. Due to variations among manufacturers, tubes and cryovials should be measured prior to selecting an insert. Measure one inch from the tube bottom and select the insert with the appropriate diameter, or check for size using inserts from your starter kit. Order is one tube rack.

Specifications

Item Type STANDARD FG
Platform Biomek 2000/Other
SystemPanel Biomek 1000
UNSPSC 41100000

NOT ALL PRODUCTS ARE AVAILABLE IN ALL COUNTRIES
PRODUCT AVAILABILITY AND REGULATORY STATUS DEPENDS ON COUNTRY REGISTRATION PER APPLICABLE REGULATIONS

The listed regulatory status for products correspond to one of the below:
IVD: In Vitro Diagnostic Products. These products are labeled "For In Vitro Diagnostic Use."
ASR: Analyte Specific Reagents. These reagents are labeled "Analyte Specific Reagents. Analytical and performance characteristics are not established."
CE: Products intended for in vitro diagnostic use and conforming to European Directive (98/79/EC). (Note: Devices may be CE marked to other directives than (98/79/EC)
RUO: Research Use Only. These products are labeled "For Research Use Only. Not for use in diagnostic procedures."
LUO: Laboratory Use Only. These products are labeled "For Laboratory Use Only."
No Regulatory Status: Non-Medical Device or non-regulated articles. Not for use in diagnostic or therapeutic procedures.