Biomek Refilling Reservoir ALP (Automated Labware Positioner) kit includes pump, tubing, reservoir and fittings. The pump is contained in the communication box, which connects to the Biomek CAN (Controller Area Network) bus. The pump is controlled by the Biomek Software, and users can fill and drain the reservoir. When in use, the reservoir will fill when the liquid volume trips the sensor in the reservoir. This unit keeps the liquid from being exposed when it’s not needed. Excess liquid can be drained back into the source container for future use or easy cleanup.

Specifications

NOT ALL PRODUCTS ARE AVAILABLE IN ALL COUNTRIES
PRODUCT AVAILABILITY AND REGULATORY STATUS DEPENDS ON COUNTRY REGISTRATION PER APPLICABLE REGULATIONS

The listed regulatory status for products correspond to one of the below:
IVD: In Vitro Diagnostic Products. These products are labeled "For In Vitro Diagnostic Use."
ASR: Analyte Specific Reagents. These reagents are labeled "Analyte Specific Reagents. Analytical and performance characteristics are not established."
CE: Products intended for in vitro diagnostic use and conforming to European Directive (98/79/EC). (Note: Devices may be CE marked to other directives than (98/79/EC)
RUO: Research Use Only. These products are labeled "For Research Use Only. Not for use in diagnostic procedures."
LUO: Laboratory Use Only. These products are labeled "For Laboratory Use Only."
No Regulatory Status: Non-Medical Device or non-regulated articles. Not for use in diagnostic or therapeutic procedures.