Adapter for Tubes in Beckman Coulter Rotors for use in Ultracentrifuge Rotors: Type 45 Ti (part # 339160), Type 70 Ti (part # 337922) Required Adapter for Tubes: 13.5 mL Thinwall Polypropylene Ultracentrifuge Tube, 16 x 76 mm; Required Cap/Spacer 330860 (part # 326814) 10.0 mL Thickwall Polypropylene Ultracentrifuge Tube, 16 x 76 mm; Cap/Spacer 338907* (part # 355640) 10 mL Thickwall Polycarbonate Ultracentrifuge Tube, 16 x 76 mm; Cap/Spacer 338907* (part # 355630) 13.5 mL Thinwall Ultra-Clear Ultracentrifuge Tube, 16 x 76 mm; Required Cap/Spacer 330860 (part # 344085) *Caps are optional for these Thickwall tubes. In the Type 45 Ti the filling level for 355640 and 355630, the filling level is 8 mL. Maximum speeds for these open-top tubes without a cap: Polycarbonate—30,000 RPM; Polypropylene—15,000 RPM.

Specifications

Platform Floor Prep
Materials Delrin
Color White
Package Quantity 1
UNSPSC 41103911

NOT ALL PRODUCTS ARE AVAILABLE IN ALL COUNTRIES
PRODUCT AVAILABILITY AND REGULATORY STATUS DEPENDS ON COUNTRY REGISTRATION PER APPLICABLE REGULATIONS

The listed regulatory status for products correspond to one of the below:
IVD: In Vitro Diagnostic Products. These products are labeled "For In Vitro Diagnostic Use."
ASR: Analyte Specific Reagents. These reagents are labeled "Analyte Specific Reagents. Analytical and performance characteristics are not established."
CE: Products intended for in vitro diagnostic use and conforming to European Directive (98/79/EC). (Note: Devices may be CE marked to other directives than (98/79/EC)
RUO: Research Use Only. These products are labeled "For Research Use Only. Not for use in diagnostic procedures."
LUO: Laboratory Use Only. These products are labeled "For Laboratory Use Only."
No Regulatory Status: Non-Medical Device or non-regulated articles. Not for use in diagnostic or therapeutic procedures.