The 6015 offers accurate and reliable continuous particle monitoring and is easy to integrate into any facility monitoring system. With a sensitivity range of 0.3 μM-10 μM, data accuracy and repeatability through ISO 21501 compliant calibration, the 6015 meets the specific needs of cleanroom operations within the pharmaceutical, semiconductor, hard disk drive and flat panel display industries. The long-life laser diode means years of service between replacement parts, plus industry leading diagnostic features that reduce troubleshooting time and related downtime costs. This version of the 6015 has a flow rate of 1.0 CFM (2.83 LPM), sensitivity of 0.5 μM at 1.0 CFM (2.83 LPM) and a range of 0.3 μM to 10.0 μM at 0.1 CFM (2.83 LPM). Counting efficiency is 50% (± 20%) for 0.5 μM (100% ± 10% at 1.5 times the minimum sensitivity). Fully complies with ISO21501-4. Ethernet output. Includes side exhaust, flow and aa ASSY Upgrade.

Specifications

Platform APC Instruments
Performance ISO 21501-4 unit-to-unit accuracy & reproducibility
ChannelsStandard Sizes Standard 2 or optional 4 (pulse units 2 channels only)
Flow Rate 28.32 L per minute
Flow Control Critical orifice, Requires 40.6 cm Hg vacuum
Coincidence Loss 10% at 20,000,000 particles/m3
Particle Size Analysis Range 0.3 to 10.00 / 0.3 to 10
Throughput 28.32 L per minute
Industry Standards 21 CFR Part 11, ISO 14644-1, CE, FCC
Operating Mode(s) Automated or remote sampling
Software Integrates with various software platforms for facility monitoring
Data Storage 1,000 samples (oldest records overwritten when buffer is full)
Environmental Conditions Safe for indoor use only
Temperature Range Operating temperature range: 10°C to 32°C, Storage temperature range: -40°C to +70°C (ambient)
Humidity Restrictions Ambient humidity: 5%-80% (non-condensing)
Power Requirements 9 to 28 VDC, 4.3 W
Material(s) 304 Stainless Steel
Weight 0.8 kg / 1.8 lb
Width 13.6 cm / 5.4 in
Depth 8.9 cm / 3.5 in
Height 12.1 cm / 4.8 in
Color Silver
Package Quantity 1
Additional Information Long Life Laser™ technology, Ethernet, Side exhaust with flow

NOT ALL PRODUCTS ARE AVAILABLE IN ALL COUNTRIES
PRODUCT AVAILABILITY AND REGULATORY STATUS DEPENDS ON COUNTRY REGISTRATION PER APPLICABLE REGULATIONS

The listed regulatory status for products correspond to one of the below:
IVD: In Vitro Diagnostic Products. These products are labeled "For In Vitro Diagnostic Use."
ASR: Analyte Specific Reagents. These reagents are labeled "Analyte Specific Reagents. Analytical and performance characteristics are not established."
CE: Products intended for in vitro diagnostic use and conforming to European Directive (98/79/EC). (Note: Devices may be CE marked to other directives than (98/79/EC)
RUO: Research Use Only. These products are labeled "For Research Use Only. Not for use in diagnostic procedures."
LUO: Laboratory Use Only. These products are labeled "For Laboratory Use Only."
No Regulatory Status: Non-Medical Device or non-regulated articles. Not for use in diagnostic or therapeutic procedures.