The ASSIST is an accessory for use with the DelsaMax PRO system when performing Zeta Potential measurements. The ASSIST reduces bubbling in the sample solution by pressurizing the flow cell >30 fold above atmospheric pressure to reduce signal interference. Particularly useful for highly conductive samples or those requiring large voltages (low charge materials) which are prone to generating bubbles under high current.

Specifications

Platform Other PC
Max Capacity Volume Range x ┬ÁL
Environmental Conditions Safe for indoor use only
Power Requirements 100-240 VAC, 50/60 Hz, 50 W (65 W max)
Weight 10 kg / 22 lb
Width 36 cm / 14.2 in
Depth 60 cm / 23.6 in
Height 5 cm / 2 in
UNSPSC 41113903

NOT ALL PRODUCTS ARE AVAILABLE IN ALL COUNTRIES
PRODUCT AVAILABILITY AND REGULATORY STATUS DEPENDS ON COUNTRY REGISTRATION PER APPLICABLE REGULATIONS

The listed regulatory status for products correspond to one of the below:
IVD: In Vitro Diagnostic Products. These products are labeled "For In Vitro Diagnostic Use."
ASR: Analyte Specific Reagents. These reagents are labeled "Analyte Specific Reagents. Analytical and performance characteristics are not established."
CE: Products intended for in vitro diagnostic use and conforming to European Directive (98/79/EC). (Note: Devices may be CE marked to other directives than (98/79/EC)
RUO: Research Use Only. These products are labeled "For Research Use Only. Not for use in diagnostic procedures."
LUO: Laboratory Use Only. These products are labeled "For Laboratory Use Only."
No Regulatory Status: Non-Medical Device or non-regulated articles. Not for use in diagnostic or therapeutic procedures.