|Throughput||Min measurement time: 1 sec|
|Operating System||Windows 7|
|Max Capacity Volume Range||45 (Cuvette) x 55 (dip cell)|
|Environmental Conditions||Safe for indoor use only|
|Power Requirements||100-240 VAC, 50/60 Hz, 50 W (65 W max)|
|Weight||19 kg / 41.9 lb|
|Width||36 cm / 14.2 in|
|Depth||60 cm / 23.6 in|
|Height||21 cm / 8.3 in|
|Additional Information||168° back scatter angle avalanche photodiode for DLS detection (size range: 0.4 to 10000 nm, hydrodynamic diameter (limited by particle sedimentation), Zeta potential measurement: 32µL detector photodiodea array|
NOT ALL PRODUCTS ARE AVAILABLE IN ALL COUNTRIES
PRODUCT AVAILABILITY AND REGULATORY STATUS DEPENDS ON COUNTRY REGISTRATION PER APPLICABLE REGULATIONS
The listed regulatory status for products correspond to one of the below:
IVD: In Vitro Diagnostic Products. These products are labeled "For In Vitro Diagnostic Use."
ASR: Analyte Specific Reagents. These reagents are labeled "Analyte Specific Reagents. Analytical and performance characteristics are not established."
CE: Products intended for in vitro diagnostic use and conforming to European Directive (98/79/EC). (Note: Devices may be CE marked to other directives than (98/79/EC)
RUO: Research Use Only. These products are labeled "For Research Use Only. Not for use in diagnostic procedures."
LUO: Laboratory Use Only. These products are labeled "For Laboratory Use Only."
No Regulatory Status: Non-Medical Device or non-regulated articles. Not for use in diagnostic or therapeutic procedures.