|Performance||± 2.5% flow accuracy|
|Light Source||Laser diffraction|
|Flow Rate||10 to 100 mL/min (sensor dependent)|
|Particle Size Analysis Range||0.50 - 600.00 μm (sensor dependent)|
|Operating Range||0.00 - 90.00 psi|
|Tare Volumes||0.1 to 100 mLin 0.1 mL steps (not to exceed 1,056 mL minus total sample volume)|
|Data Storage||3,000 records|
|Reporting||User-defined, Raw counts|
|Environmental Conditions||Maximum altitude: 2000 m, Safe for indoor use only|
|Temperature Range||Operating temp range: 5°C to 40°C|
|Humidity Restrictions||10%-80% relative humidity (non-condensing)|
|Power Requirements||100-240 VAC, 50/60 Hz|
|Pump Type||Fluid degas option (vacuum) requires optional pump|
|Weight||26.40 kg / 58.2020372168077 lb|
|Width||38.20 cm / 15.0393700787402 in|
|Depth||40.80 cm / 16.0629921259843 in|
|Height||71.70 cm / 28.2283464566929 in|
NOT ALL PRODUCTS ARE AVAILABLE IN ALL COUNTRIES
PRODUCT AVAILABILITY AND REGULATORY STATUS DEPENDS ON COUNTRY REGISTRATION PER APPLICABLE REGULATIONS
The listed regulatory status for products correspond to one of the below:
IVD: In Vitro Diagnostic Products. These products are labeled "For In Vitro Diagnostic Use."
ASR: Analyte Specific Reagents. These reagents are labeled "Analyte Specific Reagents. Analytical and performance characteristics are not established."
CE: Products intended for in vitro diagnostic use and conforming to European Directive (98/79/EC). (Note: Devices may be CE marked to other directives than (98/79/EC)
RUO: Research Use Only. These products are labeled "For Research Use Only. Not for use in diagnostic procedures."
LUO: Laboratory Use Only. These products are labeled "For Laboratory Use Only."
No Regulatory Status: Non-Medical Device or non-regulated articles. Not for use in diagnostic or therapeutic procedures.