|Detection||Photodiodes (forward & side scatter), Photomultiplier tubes (fluorescence)|
|Resolution||HPCV is <2%|
|Performance||<112 MESF for FITC, <78 MESF for PE, <15 MESF for PC5|
|Optics/Laser Power||488 nm solid state laser (22 mW), 638 nm solid state laser (25 mW)|
|Flow Cell||Patent-pending, alignment-free integrated optics quartz flow cell (420 μm x 180 μm ID) design with >1.3 numerical aperture|
|Signal Processing||Digital System with 4 decade data display|
|Software||Navios Tetra, Navios Win 7 Workstation & software upgrade|
|Power Requirements||100-240 VAC, 50/60 Hz|
|Temperature Range||15.5°C - 32°C|
|Humidity Restrictions||35%-85% (non-condensing)|
|Regulatory Status||IVD, CE|
|Throughput||Up to 80 tubes per hour at 10,000 events/sec|
|Installation Category||II (per IEC 61010-1 standard)|
|Fluidics||10 L IsoFlow External Sheath Container, 20 L Waste Container, 1.5 L Flow Cleaning Fluid Tank , 1.5 L Internal Sheath Tank|
|Weight||104 kg / 229.3 lb|
|Width||95.3 cm / 37.5 in|
|Depth||70.1 cm / 27.6 in|
|Height||60.5 cm / 23.8 in|
NOT ALL PRODUCTS ARE AVAILABLE IN ALL COUNTRIES
PRODUCT AVAILABILITY AND REGULATORY STATUS DEPENDS ON COUNTRY REGISTRATION PER APPLICABLE REGULATIONS
The listed regulatory status for products correspond to one of the below:
IVD: In Vitro Diagnostic Products. These products are labeled "For In Vitro Diagnostic Use."
ASR: Analyte Specific Reagents. These reagents are labeled "Analyte Specific Reagents. Analytical and performance characteristics are not established."
CE: Products intended for in vitro diagnostic use and conforming to European Directive (98/79/EC). (Note: Devices may be CE marked to other directives than (98/79/EC)
RUO: Research Use Only. These products are labeled "For Research Use Only. Not for use in diagnostic procedures."
LUO: Laboratory Use Only. These products are labeled "For Laboratory Use Only."
No Regulatory Status: Non-Medical Device or non-regulated articles. Not for use in diagnostic or therapeutic procedures.