|Detection||Forward scatter: Fourier design (up to 3 measurements of forward angle), Side scatter: independently-focused photodiode with electronic attenuation, Fluorescence: FL1-FL10|
|Flow Cell||150 x 460 µm rectangular quartz gel coupled with 1.2 NA lens|
|Signal Processing||Dynamic range: 20-bit date acquisition, 1,048,576-channel workstation resolution, Digital sampling rate: 40MHz, Digital accuracy: < 5% error|
|Power Requirements||50/60 Hz, 100-240 VAC|
|Temperature Range||15.5°C - 32°C|
|Humidity Restrictions||30%-85% (non-condensing)|
|Throughput||80 tubes/hour for 10,000 normal whole blood lymphocytes, Up to 88 tubes/hour at 10,000 events per second of concentrated beads|
NOT ALL PRODUCTS ARE AVAILABLE IN ALL COUNTRIES
PRODUCT AVAILABILITY AND REGULATORY STATUS DEPENDS ON COUNTRY REGISTRATION PER APPLICABLE REGULATIONS
The listed regulatory status for products correspond to one of the below:
IVD: In Vitro Diagnostic Products. These products are labeled "For In Vitro Diagnostic Use."
ASR: Analyte Specific Reagents. These reagents are labeled "Analyte Specific Reagents. Analytical and performance characteristics are not established."
CE: Products intended for in vitro diagnostic use and conforming to European Directive (98/79/EC). (Note: Devices may be CE marked to other directives than (98/79/EC)
RUO: Research Use Only. These products are labeled "For Research Use Only. Not for use in diagnostic procedures."
LUO: Laboratory Use Only. These products are labeled "For Laboratory Use Only."
No Regulatory Status: Non-Medical Device or non-regulated articles. Not for use in diagnostic or therapeutic procedures.