CytoFLEX S V0-B4-R0-I2 Flow Cytometer has 2 active lasers (488 nm, 808 nm) and 6 channels for fluorescence detection. This instrument can be upgraded with a maximum of 4 Violet, 4 Blue, 3 Red and 2 Infrared channels. It includes 13 repositionable bandpass filters, 450/45, 525/40 (2), 585/42, 610/20, 660/10 (2), 690/50, 712/25, 763/43 (2), 840/20, 885/40. The complete system is supplied with computer work station with CytExpert Acquisition software, sheath and waste containers with harness.

Specifications

Software CytExpert software
Regulatory Status RUO
Resolution <300 nm particles (488 nm side scatter), <200 nm particles (405 nm side scatter); rCV 3%
Performance <30 MESF for FITC
Detectors Photodiodes
Flow Cell Patent-pending, alignment-free integrated optics quartz flow cell (420 μm x 180 μm ID) design with >1.3 numerical aperture
Signal Processing 7 Digital sampling rate: 40 MHz
Power Requirements 100-240 VAC, 50/60 Hz
Weight 23.4 kg / 51.6 lb
Width 42.5 cm / 16.7 in
Depth 42.5 cm / 16.7 in
Height 34 cm / 13.4 in

Technical Documents

NOT ALL PRODUCTS ARE AVAILABLE IN ALL COUNTRIES
PRODUCT AVAILABILITY AND REGULATORY STATUS DEPENDS ON COUNTRY REGISTRATION PER APPLICABLE REGULATIONS

The listed regulatory status for products correspond to one of the below:
IVD: In Vitro Diagnostic Products. These products are labeled "For In Vitro Diagnostic Use."
ASR: Analyte Specific Reagents. These reagents are labeled "Analyte Specific Reagents. Analytical and performance characteristics are not established."
CE: Products intended for in vitro diagnostic use and conforming to European Directive (98/79/EC). (Note: Devices may be CE marked to other directives than (98/79/EC)
RUO: Research Use Only. These products are labeled "For Research Use Only. Not for use in diagnostic procedures."
LUO: Laboratory Use Only. These products are labeled "For Laboratory Use Only."
No Regulatory Status: Non-Medical Device or non-regulated articles. Not for use in diagnostic or therapeutic procedures.