Avanti J-30I

Achieve the fastest separations possible in the shortest amount of time with the Avanti® J-30I high performance centrifuge

  • Swinging-bucket and fixed-angle rotors provide maximum separation forces in excess of 100,000 x g at speeds up to 30,000 rpm
  • Unmatched acceleration/deceleration rates
  • 4.0L max capacity

 

 

Features

High-Throughput Processing

  • Four-liter batch throughput for bacteria and cell membrane isolation using the JLA-9.1000 J-LITE rotor at 16,800 x g
  • DNA sample prep in up to ten microplates with the JS-5.9 rotor

Applications Versatility

  • Quickly and easily process protein separations with a fixed-angle rotor
  • Separate sub-cellular organelles with rate zonal centrifugation

Sample Protection

  • Maintain sample integrity by customizing acceleration and deceleration rates
  • Samples spend more time at full force and less time in the centrifuge

Time and Efficiency

  • Reduce total time spent on a separation protocol
  • Conduct consecutive runs based on acceleration and deceleration profiles
  • Low-heat output and low-energy consumption

Product Specifications

Max Speed 30,000 rpm
Max g Force 110,500.00 x g
Acceleration Maximum, Slow or Timed (1-10 minutes, 0-500 rpm)
Deceleration Maximum, Slow, Timed (1-10 minutes from 500-0 rpm) or Off
Speed Control 10 rpm of set speed or 0.15%, whichever is greater
Timed Run 1 minute-99 hours, 59 minutes; Hold or Ω 2t
Max Capacity Volume Range 1 x 4 L
Refrigeration System Non-CFC, non-ozone depleting refrigerant
Max Heat Dissipation 2 kW (6,900 BTU/hr)
Drive Type Cooling SR Drive* / Air cooled
Time (Actual Display) Indicates run time remaining (timed run) or elapsed time (hold run)
Temperature Range(s) -20° to +40° C
Rotor Chamber Diameter 40.6 cm / 16 in
Item Specifications Referenced 363118