This HP 26 XPI centrifuge is compatible with Japan’s electrical grid and offers high throughput and versatility. It includes the J-LITE JLA-8.1000 6-liter rotor, polycarbonate and polypropylene bottles and disposable HarvestLine system liners, and can process 6 liters in 10 minutes. The system runs our full line of high-performance rotors, including the JS-5.3 rotor with optional microplate carriers and adapters for conical tubes and bottles. The XPI can analyze delicate DNA samples at up to 24 microplates at a time with the JS-5.3 rotor. The throughput for bacterial and cell membrane isolation spins at forces up to 15,900 x g using the J-LITE JLA-8.1000 rotor. Provides the fastest acel/decel with the Switched Reluctance (SR) Drive exclusive to this brand.


Platform Avanti
Max Speed 26,000 rpm
Max g-Force to 82,000.00 x g
BioSafe No
Acceleration Maximum or Slow
Deceleration Maximum, slow, or off
Speed Control ± 10 rpm from 10,000 - 26,000 or equivalent RCF
Timed Run 1 min to 99 hr 59 min; 2t or Continuous (hold)
Max Capacity Volume Range 1 x 6 L
Refrigeration System Non-CFC, non-ozone depleting refrigerant
Software Virtual Network Computing (VNC), Mobile Fuge app for Apple iOS and Android
Max Heat Dissipation 2 kW (6,900 BTU/hr)
Temperature Control ± 2 °C of set temperature after equilibration
Drive Type Cooling SR Drive* / Air cooled
Time (Actual Display) Indicates estimated run time remaining (timed run), g-seconds setting & time remaining to accumulate set g seconds or elapsed time (hold run)
Temperature Range(s) 10°C - 40°C in 1 degree increments
Rotor Chamber Diameter 51.3 cm / 20.2 in
Zonal Capability No
Installation Category II
Sterile Available
Humidity Restrictions < 95% (non-condensing)
Finish Powder Coat Paint
Weight 290 kg / 639.3 lb
Width 71 cm / 28 in
Depth 86 cm (102.0 cm with air direviter extending)
Height 86 cm / 33.9 in
Clearances 7.6 cm (sides) & 16 cm (rear)
Pollution Degree 2
Max Noise Output 57 dBa
Additional Information Sterile available
UNSPSC 41103905


The listed regulatory status for products correspond to one of the below:
IVD: In Vitro Diagnostic Products. These products are labeled "For In Vitro Diagnostic Use."
ASR: Analyte Specific Reagents. These reagents are labeled "Analyte Specific Reagents. Analytical and performance characteristics are not established."
CE: Products intended for in vitro diagnostic use and conforming to European Directive (98/79/EC). (Note: Devices may be CE marked to other directives than (98/79/EC)
RUO: Research Use Only. These products are labeled "For Research Use Only. Not for use in diagnostic procedures."
LUO: Laboratory Use Only. These products are labeled "For Laboratory Use Only."
No Regulatory Status: Non-Medical Device or non-regulated articles. Not for use in diagnostic or therapeutic procedures.