High-speed processing for multi-user, multi-protocol labs. The J-26 XP three-phase centrifuge can process up to six liters in less than ten minutes, the fastest processing possible of any comparable machine. The elutriation functionality of this build sorts individual particles by size, while the three-phase filtration sorts the sluice into its solids, gases and liquids. With a full range of rotors, adapters and sample carriers, the Avanti J-26 XP offers incredible versatility to support your research needs for years to come. Features 6.0L max capacity, 26,000 RPM (82,000 x g). The J-26 XP runs 24 microplates at a time (or with adaptors for conical tubes and bottles) and separates live cell populations with elutriation. Full containment barrier, automatic rotor identification and enhanced biosafety. Compatible with an extensive rotor library, including lightweight carbon fiber designs, fixed-angle, swinging bucket and elutriation. Also compatible with J-Lite rotors. Exclusive Switched Reluctance (SR) Drive for faster accel and decel.


Platform Avanti
BioSafe No
Acceleration Maximum, Slow or Timed (1-10 minutes, 0-500 rpm)
Deceleration Maximum, Slow, Timed (1-10 minutes from 500-0 rpm) or Off
Speed Control ±|10.00|rpm of set speed or 0.1%, whichever is greater
Timed Run Up to 180 mins or Continuous hold
Max Capacity Volume Range 1.00|6.00|L
Software Virtual Network Computing (VNC), Mobile Fuge app for Apple iOS and Android
Temperature Range(s) 10°C - 40°C in 1 degree increments
Friction Reduction System Mechanical rotary vane pump reduces chamber pressure to 0.25 ATM (190 mm Hg)
Zonal Capability No
Installation Category II
Environmental Conditions -10°C to 40°C in 1° increments
Humidity Restrictions < 95% (non-condensing)
Material(s) Steel, Plastic
Finish Powder Coat Paint
Weight 290.00|kg / 639.340560336145|lb
Width 71.00|cm / 27.9527559055118|in
Depth 86.00|cm (102.0 cm with air direviter extending)
Height 86.00|cm (149 cm with door open)
Clearances 7.6 cm (sides) & 16 cm (rear)
Pollution Degree 2
Power Requirements 220 VAC, 50 Hz, 3 Phase

Technical Documents


The listed regulatory status for products correspond to one of the below:
IVD: In Vitro Diagnostic Products. These products are labeled "For In Vitro Diagnostic Use."
ASR: Analyte Specific Reagents. These reagents are labeled "Analyte Specific Reagents. Analytical and performance characteristics are not established."
CE: Products intended for in vitro diagnostic use and conforming to European Directive (98/79/EC). (Note: Devices may be CE marked to other directives than (98/79/EC)
RUO: Research Use Only. These products are labeled "For Research Use Only. Not for use in diagnostic procedures."
LUO: Laboratory Use Only. These products are labeled "For Laboratory Use Only."
No Regulatory Status: Non-Medical Device or non-regulated articles. Not for use in diagnostic or therapeutic procedures.