The J-26 XP is perfect for laboratories with multiple users and variable protocols that need a high-speed, hard-working, multi-profile programmable centrifuge. This build includes elutriation, for sorting and identifying individual particles by size. The J-26 XP can also process up to six liters in less than ten minutes, the fastest processing of any comparable machine. Includes a full range of rotors, adapters and sample carriers, the J-26 XP offers incredible versatility to support research needs for years to come. Features 6.0L max capacity, 26,000 RPM (82,000 x g). The J-26 XP runs 24 microplates at a time (or with adaptors for conical tubes and bottles). Full containment barrier, automatic rotor identification and enhanced biosafety. Compatible with an extensive rotor library, including lightweight carbon fiber designs, fixed-angle and swinging bucket. Also compatible with J-Lite rotors. Exclusive Switched Reluctance (SR) Drive for faster accel and decel.


Platform Avanti
Max Speed 26,000 rpm
Max g-Force to 82000 x g
BioSafe No
Acceleration Maximum, Slow or Timed (1-10 minutes, 0-500 rpm)
Deceleration Maximum, Slow, Timed (1-10 minutes from 500-0 rpm) or Off
Speed Control ± 10 rpm of set speed or 0.1%, whichever is greater
Timed Run 1 minute-3 hours; Continuous Hold
Max Capacity Volume Range 1 - 6 L
Refrigeration System Non-CFC, non-ozone depleting refrigerant
Software Virtual Network Computing (VNC), Mobile Fuge app for Apple iOS and Android
Max Heat Dissipation 2 kW (6,900 BTU/hr)
Temperature Control ± 2 °C of set temperature after equilibration
Drive Type Cooling SR Drive* / Air cooled
Time (Actual Display) Indicates run time remaining (timed run) or elapsed time (hold run)
Temperature Range(s) 10°C - 40°C in 1 degree increments
Rotor Chamber Diameter 51.3 cm / 20.2 in
Friction Reduction System Mechanical rotary vane pump reduces chamber pressure to 0.25 ATM (190 mm Hg)
Zonal Capability No
Installation Category II
Sterile Available
Environmental Conditions -10°C to 40°C in 1° increments
Humidity Restrictions < 95% (non-condensing)
Material(s) Steel, Plastic
Finish Powder Coat Paint
Weight 290 kg / 639.3 lb
Width 71 cm / 28 in
Depth 86 cm (102.0 cm with air direviter extending)
Height 86 cm (149 cm with door open)
Clearances 7.6 cm (sides) & 16 cm (rear)
Pollution Degree 2
Max Noise Output 57 dBa
Additional Information Sterile available
Power Requirements 200/208/240 V, 50/60 Hz
UNSPSC 41103905


The listed regulatory status for products correspond to one of the below:
IVD: In Vitro Diagnostic Products. These products are labeled "For In Vitro Diagnostic Use."
ASR: Analyte Specific Reagents. These reagents are labeled "Analyte Specific Reagents. Analytical and performance characteristics are not established."
CE: Products intended for in vitro diagnostic use and conforming to European Directive (98/79/EC). (Note: Devices may be CE marked to other directives than (98/79/EC)
RUO: Research Use Only. These products are labeled "For Research Use Only. Not for use in diagnostic procedures."
LUO: Laboratory Use Only. These products are labeled "For Laboratory Use Only."
No Regulatory Status: Non-Medical Device or non-regulated articles. Not for use in diagnostic or therapeutic procedures.