The J-26 XP is perfect for laboratories with multiple users and variable protocols that need a high-speed, hard-working, multi-profile programmable centrifuge. The J-26 XP can process up to six liters in less than ten minutes, the fastest processing of any comparable machine. It includes a full range of rotors, adapters and sample carriers and offers incredible versatility to support research needs for years to come. Features 6.0L max capacity and a max speed of 26,000 RPM (82,000 x g). The J-26 XP runs 24 microplates at a time (or with adaptors for conical tubes and bottles). Full containment barrier, automatic rotor identification and enhanced biosafety. Compatible with an extensive rotor library, including lightweight carbon fiber designs, fixed-angle and swinging bucket. Also compatible with J-Lite rotors. Exclusive Switched Reluctance (SR) Drive for faster accel and decel.

Specifications

Platform Avanti
BioSafe Yes
Acceleration Maximum, Slow or Timed (1-10 minutes, 0-500 rpm)
Deceleration Maximum, Slow, Timed (1-10 minutes from 500-0 rpm) or Off
Speed Control ±|10.00|rpm of set speed or 0.1%, whichever is greater
Timed Run 1 minute-3 hours; Continuous Hold
Max Capacity Volume Range 1.00|6.00|L
Software Virtual Network Computing (VNC), Mobile Fuge app for Apple iOS and Android
Temperature Control ± 2|°C of set temperature after equilibration
Temperature Range(s) 10°C - 40°C in 1 degree increments
Rotor ID Manual
Friction Reduction System Mechanical rotary vane pump reduces chamber pressure to 0.25 ATM (190 mm Hg)
Zonal Capability No
Environmental Conditions -10°C to 40°C in 1° increments
Humidity Restrictions < 95% (non-condensing)
Material(s) Steel, Plastic
Finish Powder Coat Paint
Weight /
Width /
Depth 86.00|cm (102.0 cm with air direviter extending)
Height 86.00|cm (149 cm with door open)
Clearances 7.6 cm (sides) & 16 cm (rear)
Pollution Degree 2
Power Requirements 200/208/240 V, 50/60 Hz

NOT ALL PRODUCTS ARE AVAILABLE IN ALL COUNTRIES
PRODUCT AVAILABILITY AND REGULATORY STATUS DEPENDS ON COUNTRY REGISTRATION PER APPLICABLE REGULATIONS

The listed regulatory status for products correspond to one of the below:
IVD: In Vitro Diagnostic Products. These products are labeled "For In Vitro Diagnostic Use."
ASR: Analyte Specific Reagents. These reagents are labeled "Analyte Specific Reagents. Analytical and performance characteristics are not established."
CE: Products intended for in vitro diagnostic use and conforming to European Directive (98/79/EC). (Note: Devices may be CE marked to other directives than (98/79/EC)
RUO: Research Use Only. These products are labeled "For Research Use Only. Not for use in diagnostic procedures."
LUO: Laboratory Use Only. These products are labeled "For Laboratory Use Only."
No Regulatory Status: Non-Medical Device or non-regulated articles. Not for use in diagnostic or therapeutic procedures.