Avanti® J-26S XP Non-IVD Three-Phase Centrifuge, 50 Hz, 220 V

Product No:B14537

Redesigned to provide even more versatility and safety. Above and beyond its BioSafety systems, the J-26S XP has a more impact-resistant lid, full containment barrier and automatic rotor identification. Built upon standard-setting performance, including high speed, low heat output, imbalance tolerance and low noise, its vast range of separations only continues to grow. Its ergonomic design--with lower instrument height and hands-free door operation--remains unchanged. The J-265 XP can process six liters of fermentor output in less than 10 minutes, deliver a subcellular fraction at 82,000 x g and run 24 microplates at a time. It automatically detects which rotor is installed and prevents the rotor from running above its maximum-rated speed, and enables quicker, quieter, more energy-efficient runs with better temperature control. The exclusive high-torque, switched reluctance (SR) drive shortens cycle times. Three-phase filtration separates materials into solids, liquids and gasses.

Product Specifications

Platform Avanti
Maximum Speed 26,000 rpm
Maximum g-Force 81800 x g
BioSafe No
Acceleration Maximum or Slow
Deceleration Maximum, slow, or off
Speed Control ± 10 rpm of set speed or 0.1%, whichever is greater
Timed Run 1 minute-3 hours; Continuous Hold
Max Capacity Volume Range 1 - 6 L
Refrigeration System Non-CFC, non-ozone depleting refrigerant
Temperature Range(s) 10°C - 40°C in 1 degree increments
Rotor ID Automatic
Zonal Capability Yes
Pollution Degree 2
Environmental Conditions -10°C to 40°C in 1° increments
Installation Category II
Software Virtual Network Computing (VNC), Mobile Fuge app for Apple iOS and Android
Material(s) Steel, Plastic
Finish Powder Coat Paint
Weight 290 kg(639.3 lb)
Width 71 cm(28 in)
Depth 86.0, 102.0 with air direviter extending cm(86.0, 102.0 with air direviter extending in)
Height 86 cm (149 cm with door open)
Clearances 7.6 cm (sides) & 16 cm (rear)
Humidity Restrictions < 95% (non-condensing)
Power Requirements 220/380 VAC, 50 Hz, 3 Phase

Customers Also Viewed