Specifications

Platform Avanti
Max Speed 10,200 rpm
Max g-Force 11420 x g
Acceleration 10 acceleration rates, including maximum torque
Deceleration 11 deceleration rates, including maximum torque and no braking
Speed Control ± 10 increments from 200 - 10,200 rpm
Timed Run 1 minute-99 hours, 59 minutes or Continuous Hold
Max Capacity Volume Range 0 - 3 L
Regulatory Status IVD
Max Heat Dissipation 4095 Btu/h (1.2 kW)
Speed Display Actual rotor speed in 10 rpm increments or actual RCF in 10 x g increments
Time (Actual Display) Indicates run time remaining (HH:MM:SS)
User Defined Programs/Steps Access to 99 programs, 6 with one-touch
Installation Category II
Humidity Restrictions 80% (non-condensing)
Material(s) Painted Steel, Uncoated Plastic, Painted Aluminum, Plastic
Weight 93 kg / 205 lb
Width 55.6 cm / 21.9 in
Depth 74.9 cm / 29.5 in
Height 36.8 cm / 14.5 in
Clearances 30 cm: sides & rear
Pollution Degree 2
Max Noise Output 71 dBA
Power Requirements 200-230V, 6A, 50/60 Hz; 100V, 12A, 50/60 Hz; 120V, 10A, 50/60Hz
UNSPSC 41103905

NOT ALL PRODUCTS ARE AVAILABLE IN ALL COUNTRIES
PRODUCT AVAILABILITY AND REGULATORY STATUS DEPENDS ON COUNTRY REGISTRATION PER APPLICABLE REGULATIONS

The listed regulatory status for products correspond to one of the below:
IVD: In Vitro Diagnostic Products. These products are labeled "For In Vitro Diagnostic Use."
ASR: Analyte Specific Reagents. These reagents are labeled "Analyte Specific Reagents. Analytical and performance characteristics are not established."
CE: Products intended for in vitro diagnostic use and conforming to European Directive (98/79/EC). (Note: Devices may be CE marked to other directives than (98/79/EC)
RUO: Research Use Only. These products are labeled "For Research Use Only. Not for use in diagnostic procedures."
LUO: Laboratory Use Only. These products are labeled "For Laboratory Use Only."
No Regulatory Status: Non-Medical Device or non-regulated articles. Not for use in diagnostic or therapeutic procedures.