Specifications

Speed Control ± 15000 rpm of set speed
Regulatory Status IVD
Max Heat Dissipation 170 W (580 BTU/hr)
Speed Display Actual rotor speed in 100 rpm increments or in RCF (when selected)
Time (Actual Display) Indicates estimated time remaining in run (timed run ± 1 minute) or ∞ and elapsed time
Temperature Range(s) 5°C - 40°C
Installation Category II
Humidity Restrictions 80% (non-condensing)
Weight 13 kg / 28.7 lb
Width 204 cm / 80.3 in
Depth 42 cm / 16.5 in
Height 180 cm (84.0 cm, with door open)
Clearances 30 cm (sides)
Pollution Degree 2
Additional Information Outfitted with FA241.5P rotor
Power Requirements 60 Hz, 120 VAC, 2.3 A
UNSPSC 41103903

NOT ALL PRODUCTS ARE AVAILABLE IN ALL COUNTRIES
PRODUCT AVAILABILITY AND REGULATORY STATUS DEPENDS ON COUNTRY REGISTRATION PER APPLICABLE REGULATIONS

The listed regulatory status for products correspond to one of the below:
IVD: In Vitro Diagnostic Products. These products are labeled "For In Vitro Diagnostic Use."
ASR: Analyte Specific Reagents. These reagents are labeled "Analyte Specific Reagents. Analytical and performance characteristics are not established."
CE: Products intended for in vitro diagnostic use and conforming to European Directive (98/79/EC). (Note: Devices may be CE marked to other directives than (98/79/EC)
RUO: Research Use Only. These products are labeled "For Research Use Only. Not for use in diagnostic procedures."
LUO: Laboratory Use Only. These products are labeled "For Laboratory Use Only."
No Regulatory Status: Non-Medical Device or non-regulated articles. Not for use in diagnostic or therapeutic procedures.