Allegra X-15R, Refrigerated Benchtop Centrifuge, 50/60 Hz, 200 V

392933

$12,100.00


Allegra X-15R General Purpose Benchtop Centrifuge, Tabletop Centrifuge, Refrigerated Centrifuge
Spinning up to three liters of sample at an incredible 4,740 RPM / 5,250 x g, the refrigerated X-15R allows you to perform faster separations and optimized recoveries. The robust refrigeration cools from ambient to 4° C in less than 4 minutes – over 10 minutes faster than equivalent three liter centrifuges. Features include a pulse timer up to 99 hours and 59 minutes, ten user-defined programs with 10 acceleration and 11 deceleration profiles, and fast and slow blood component spins.

Specifications

Platform Allegra X-12
Maximum Speed 10,200 rpm with Fixed-Angle rotor (4,750 rpm with Swinging-Bucket rotor)
Maximum g-Force 5250 x g
Acceleration 10 profiles
Deceleration 11 profiles
Timed Run Up to 99 hrs, 59 mins
Max Capacity Volume Range - 3000 mL
Refrigeration System Yes, CFC-Free
Material(s) 3M Tape #439 with Bioinert adhesive backing, Acrylic, Acrylic baking enamel, Aluminum, Aluminum rotor, Aluminum sheet metal, Aluminum & Stainless Steel, Aluminum base, Aluminum chassis, Aluminum extrusion, Aluminum head, Aluminum plate, Aluminum-Silver, Aluminum/Titanim, Aluminum/Titanium, Anodized Aluminum, Anodized Aluminum Sample Tray, Anondized aluminum, Anondized aluminum cap, Anondized aluminum sample tray, Cellulose propionate, Chylomicron, Coated polycarbonate, Coated polystyrene copolymer, Coated polystyrene copolymer, Acrylic baking enamel, Corning, Delrin, Derlin, Door material: Thick plastic resin with steel plate, Door material: Thick structural foam with steel plate, Ethyl vinyl acetate (EVA), Glass, High-impact polycarbonate ABS enclosure, High-strength structural steel door material, High impact polycarbonate ABS enclosure, Kynar, Metal, Neoprene, Nitrile rubber, Noryl, Nylon, PharMed, Plastic, Pollyamer, Pollyamer natural, Polyallomer, Polycarbonate, Polyethelene, Polyetherimide, Polyethermide, Polyethylene, Polyphenylsulfone (PPSU), Polypropelene, Polypropylene, Polystyrene, Polystyrene (flat bottom), Polyterephtalate, Polyterephthalate, Pyrex, Rubber, Rynite®, Rynite®, Soft rubber, Stainless steel, Stainless steel enclosure, Steel, Structural Foam, Teflon, Teflon coated, Thermoplastic, Thickwall polypropylene, Thinwall polypropylene, Titanium, Titanium Buckets, Tygon, Ultem, Ultra-Clear™, Ultra-Clear, Ultra-Clear™, Vinylite, Viton, Viton #2-005
Weight 128 kg / 282.2 lb
Width 76.2 cm / 30 in
Depth 62.2 cm / 24.5 in
Height 34.3 cm / 13.5 in
Power Requirements 50/60 Hz, 200 VAC

NOT ALL PRODUCTS ARE AVAILABLE IN ALL COUNTRIES
PRODUCT AVAILABILITY AND REGULATORY STATUS DEPENDS ON COUNTRY REGISTRATION PER APPLICABLE REGULATIONS

The listed regulatory status for products correspond to one of the below:
IVD: In Vitro Diagnostic Products. These products are labeled "For In Vitro Diagnostic Use."
ASR: Analyte Specific Reagents. These reagents are labeled "Analyte Specific Reagents. Analytical and performance characteristics are not established."
CE: Products intended for in vitro diagnostic use and conforming to European Directive (98/79/EC). (Note: Devices may be CE marked to other directives than (98/79/EC)
RUO: Research Use Only. These products are labeled "For Research Use Only. Not for use in diagnostic procedures."
LUO: Laboratory Use Only. These products are labeled "For Laboratory Use Only."
No Regulatory Status: Non-Medical Device or non-regulated articles. Not for use in diagnostic or therapeutic procedures.