The MET ONE HHPC 6+ is a six-channel handheld particle counter designed for a wide range of tasks in high technology cleanroom and manufacturing environments such as semiconductor or flat panel display manufacturing. The unique cradle provides convenient PC access to particle counting data via Ethernet or USB cable while ensuring that the HHPC 6+ is fully charged and ready for use at all times.

Specifications

Platform APC Instruments
Channels/Standard Sizes 2 channels: 0.3, 0.5 μm
Flow Rate 2.83 L per minute
Coincidence Loss 5% at 70,630,000 particles/m3
Count Alarms, Display & Cycles User-defined alarm counts, User-defined alarm counts displayed via LED on box or remote LED
Interfaces & Protocols Serial RS485
Power Requirements 6 VDC +/- 10%, 125 mA
Temperature Range Operating temperature range: 12°C to 29°C, Storage temperature range: -40°C to +70°C (ambient)
Environmental Conditions Safe for indoor use only
Humidity Restrictions 20% to 95% (non-condensing)
Color Silver
Weight 0.3 kg / 0.7 lb
Width 9.4 cm / 3.7 in
Depth 3.8 cm / 1.5 in
Height 6 cm / 2.4 in

NOT ALL PRODUCTS ARE AVAILABLE IN ALL COUNTRIES
PRODUCT AVAILABILITY AND REGULATORY STATUS DEPENDS ON COUNTRY REGISTRATION PER APPLICABLE REGULATIONS

The listed regulatory status for products correspond to one of the below:
IVD: In Vitro Diagnostic Products. These products are labeled "For In Vitro Diagnostic Use."
ASR: Analyte Specific Reagents. These reagents are labeled "Analyte Specific Reagents. Analytical and performance characteristics are not established."
CE: Products intended for in vitro diagnostic use and conforming to European Directive (98/79/EC). (Note: Devices may be CE marked to other directives than (98/79/EC)
RUO: Research Use Only. These products are labeled "For Research Use Only. Not for use in diagnostic procedures."
LUO: Laboratory Use Only. These products are labeled "For Laboratory Use Only."
No Regulatory Status: Non-Medical Device or non-regulated articles. Not for use in diagnostic or therapeutic procedures.