|Flow Rate||2.83 LPM (ISO 14644-1 Class 5 compliant 0.3 µm samples in 1 min)|
|Zero Count||Conforms to JIS B9921 (1 count or less in 5 min; 95% UCL)|
|Coincidence Loss||10% at 4,000,000/m3 (per ISO-21501-4 method)|
|Counting Efficiency||50% at 0.3 µm (100% for particles > 0.45 µm)|
|Count Alarms, Display & Cycles||Raw counts: N/CF, N/CM, N/L (cumulative/differential mode); user-defined alarm counts|
|Data Storage||10,000 records|
|Power Requirements||100-240 VAC, 50/60 Hz, 1.0 A|
|Temperature Range||Operating temperature range: 10°C to 40°C, Storage temperature range: -10°C to 50°C|
|Environmental Conditions||Safe for indoor use only|
|Humidity Restrictions||< 95% non-condensing|
|Battery||Lithium ion smart battery (rechargeable, ejectable & hot-swappable)|
|Battery Operating Time||10+ hours (typical use) / minimum 5.5 hours (continuous sampling)|
|Battery Recharge Time||3.5 hours|
NOT ALL PRODUCTS ARE AVAILABLE IN ALL COUNTRIES
PRODUCT AVAILABILITY AND REGULATORY STATUS DEPENDS ON COUNTRY REGISTRATION PER APPLICABLE REGULATIONS
The listed regulatory status for products correspond to one of the below:
IVD: In Vitro Diagnostic Products. These products are labeled "For In Vitro Diagnostic Use."
ASR: Analyte Specific Reagents. These reagents are labeled "Analyte Specific Reagents. Analytical and performance characteristics are not established."
CE: Products intended for in vitro diagnostic use and conforming to European Directive (98/79/EC). (Note: Devices may be CE marked to other directives than (98/79/EC)
RUO: Research Use Only. These products are labeled "For Research Use Only. Not for use in diagnostic procedures."
LUO: Laboratory Use Only. These products are labeled "For Laboratory Use Only."
No Regulatory Status: Non-Medical Device or non-regulated articles. Not for use in diagnostic or therapeutic procedures.