The 7015 remote air particle counter provides high accuracy non-viable particle monitoring for cGMP/FDA compliance. Stainless steel wash-down resistant enclosure and VHP tolerant optics protect the instrument while ISO 21501 certified calibration assures accurate continuous monitoring in aseptic and sterile pharmaceutical production environments. Rugged design for cleanroom use with Industry leading particle counting on-line reliability. ISO 21501 compliant with built-in flow sensor for CFR21 data accuracy and reliability. Communication and mechanical specs include Ethernet with TCP/IP protocol and standard two-channel 0.5 μM at 1.0 CFM, with flow. A/C and B power cord. No pump. Includes aa ASSY upgrade.

Specifications

Channels/Standard Sizes Standard 2 or optional 4 (pulse units 2 channels only)
Flow Rate 2.83 LPM (ISO 14644-1 Class 5 compliant 0.3 µm samples in 1 min)
Zero Count ISO 21501-4 & JIS B 9921 (1 count or less in 5 min; 95% UCL)
Coincidence Loss 5% at 14,000,000 particles m/3
Industry Standards CE, ISO 21501-4
Count Alarms, Display & Cycles User-defined alarm counts
Data Storage 1,000 samples (oldest records overwritten when buffer is full)
Interfaces & Protocols Ethernet with Modbus TCP protocol
Power Requirements 100-230 VAC, 50/60 Hz
Temperature Range Storage temperature range: -40°C to +70°C (ambient) , Operating temperature range: 10°C to 32°C
Environmental Conditions Indoor washdown environment
Humidity Restrictions 5%-95% (non-condensing)
Color Silver
Weight 4 kg / 8.8 lb
Width 22.9 cm / 9 in
Depth 12.5 cm / 4.9 in
Height 16 cm / 6.3 in
Additional Information Ethernet with flow; AC 'B' Power Cord. Pump not included

NOT ALL PRODUCTS ARE AVAILABLE IN ALL COUNTRIES
PRODUCT AVAILABILITY AND REGULATORY STATUS DEPENDS ON COUNTRY REGISTRATION PER APPLICABLE REGULATIONS

The listed regulatory status for products correspond to one of the below:
IVD: In Vitro Diagnostic Products. These products are labeled "For In Vitro Diagnostic Use."
ASR: Analyte Specific Reagents. These reagents are labeled "Analyte Specific Reagents. Analytical and performance characteristics are not established."
CE: Products intended for in vitro diagnostic use and conforming to European Directive (98/79/EC). (Note: Devices may be CE marked to other directives than (98/79/EC)
RUO: Research Use Only. These products are labeled "For Research Use Only. Not for use in diagnostic procedures."
LUO: Laboratory Use Only. These products are labeled "For Laboratory Use Only."
No Regulatory Status: Non-Medical Device or non-regulated articles. Not for use in diagnostic or therapeutic procedures.