With a sensitivity range of 0.3 μM-10 μM, data accuracy and repeatability through ISO 21501 compliant calibration, the 6003 meets the specific needs of cleanroom operations within the pharmaceutical, semiconductor, hard disk drive and flat panel display industries. The 6003 is easy to integrate into any facility monitoring system. The 6003 offers accurate and reliable continuous particle monitoring. The long-life laser diode means years of service between replacement parts, plus industry leading diagnostic features that reduce troubleshooting time and related downtime costs. This build of the 6003 has a flow rate of 0.1 CFM (2.83 LPM), sensitivity of 0.3 μM at 0.1 CFM (2.83 LPM) and a range of 0.3 μM to 10.0 μM at 0.1 CFM (2.83 LPM). Counting efficiency is 50% (± 20%) for 0.3 μM (100% ± 10% at 1.5 times the minimum sensitivity). Fully complies with ISO21501-4. Serial port RS-232 output. Includes flow, side exhaust and aa ASSY upgrade.

Specifications

Platform APC Instruments
BioSafe No
Color Silver
Package Quantity 1
Additional Information Long Life Laser™ Technology

NOT ALL PRODUCTS ARE AVAILABLE IN ALL COUNTRIES
PRODUCT AVAILABILITY AND REGULATORY STATUS DEPENDS ON COUNTRY REGISTRATION PER APPLICABLE REGULATIONS

The listed regulatory status for products correspond to one of the below:
IVD: In Vitro Diagnostic Products. These products are labeled "For In Vitro Diagnostic Use."
ASR: Analyte Specific Reagents. These reagents are labeled "Analyte Specific Reagents. Analytical and performance characteristics are not established."
CE: Products intended for in vitro diagnostic use and conforming to European Directive (98/79/EC). (Note: Devices may be CE marked to other directives than (98/79/EC)
RUO: Research Use Only. These products are labeled "For Research Use Only. Not for use in diagnostic procedures."
LUO: Laboratory Use Only. These products are labeled "For Laboratory Use Only."
No Regulatory Status: Non-Medical Device or non-regulated articles. Not for use in diagnostic or therapeutic procedures.