MET ONE 3411 portable air particle counters are designed specifically for semiconductor cleanroom monitoring, process benchmarking and particle troubleshooting applications. With industry leading ISO 21501 accuracy and reproducibility, the MET ONE 3411 is the cleanest 0.1μm portable air particle counter in the market.

Specifications

Channels/Standard Sizes 6 channels (0.1 µm, 0.2 µm, 0.3 µm, 0.5 µm, 1 µm, 5 µm)
Light Source Helium neon laser
Flow Rate 1.0 CFM (28.3 LPM)
Zero Count ISO 21501-4 & JIS B 9921 (1 count or less in 5 minutes; 95% Upper Confidence Limit)
Coincidence Loss % at 1,765,000 particles/m3 (per ISO 21501-4 method)
Industry Standards CE, ISO 21501-4
Counting Efficiency 50% at 0.1 μm (100% for particles > 0.15 μm per ISO 21501-4 & JIS B 9921)
Count Alarms, Display & Cycles User-defined alarm counts, Raw counts: N/CF, N/CM, N/L in cumulative or differential mode
Data Storage 5000 samples
Display Color 1/4 VGA TFT touch screen
Power Requirements 24 VDC; 3.2A with 100-240 VAC; 50/60 Hz adapter (included in ship kit)
Temperature Range Operating temperature range: 0°C to 40°C, Storage temperature range: -40°C to 50°C
Environmental Conditions Safe for indoor use only
Humidity Restrictions 10%-90% relative humidity (non-condensing)
Pump Type Air vacuum, rated for continuous use
Battery Lithium ion smart battery (rechargeable, ejectable & hot-swappable)
Battery Operating Time 3 hours (minimum)
Battery Recharge Time 6.75 hours (minimum) - 10 hours (maximum)
Label Locations ID: 0 to 999; NAME: Alphanumeric (appears on printout)
Operating System Windows® CE
Color Silver
Weight 15.9 kg (without battery)
Width 33 cm / 13 in
Depth 56 cm / 22 in
Height 23 cm / 9.1 in
Additional Information Without Wifi; Gases CAL

NOT ALL PRODUCTS ARE AVAILABLE IN ALL COUNTRIES
PRODUCT AVAILABILITY AND REGULATORY STATUS DEPENDS ON COUNTRY REGISTRATION PER APPLICABLE REGULATIONS

The listed regulatory status for products correspond to one of the below:
IVD: In Vitro Diagnostic Products. These products are labeled "For In Vitro Diagnostic Use."
ASR: Analyte Specific Reagents. These reagents are labeled "Analyte Specific Reagents. Analytical and performance characteristics are not established."
CE: Products intended for in vitro diagnostic use and conforming to European Directive (98/79/EC). (Note: Devices may be CE marked to other directives than (98/79/EC)
RUO: Research Use Only. These products are labeled "For Research Use Only. Not for use in diagnostic procedures."
LUO: Laboratory Use Only. These products are labeled "For Laboratory Use Only."
No Regulatory Status: Non-Medical Device or non-regulated articles. Not for use in diagnostic or therapeutic procedures.