|
|
The Biomek NXP Laboratory Automation Workstation is the most flexible automated liquid handling system available today. The following specifications are for the most common Biomek NXP configurations. For more detailed dimensional and site preparation data or for ordering information, please request the Pre-Installation Manual from your local sales representative.
Specifications |
Ordering Information | Biomek Software and Controller
Specifications
| |
Workstation |
| Weight: |
190 lb. (86.18 kg) |
| Height: |
44 in. (111.76 cm) |
| Width: |
36 in. (91.44 cm) |
| Depth: |
32 in. (81.28 cm) |
| Power Requirements: |
50/60 Hz, 100-240VAC |
Pipetting Options
96-Channel Disposable Tip Pipetting Head
384-Channel Disposable Tip Pipetting Head
Span 8 Fixed 100 Probes
Span 8 Fixed 60 Probes
Span 8 P250 Disposable Tips
Span 8 P250 Liquid Level Sensing Tips
Span 8 P20 Disposable Tips
Span 8 P20 Liquid Level Sensing Tips
Septum Piercing Probes
Gripper Tool
Used to move labware and devices around the Biomek worksurface to
automate fully filtration -based processes suc as nucleic acid
purification and provide access to integrated plate readers.
Minimum Table Requirements
25 in. (64 cm) Width x 24 in. (61 cm) Depth
Sufficient to support 300 lb. (136.2 kg)
back to top
Ordering Information
| Part No. |
Description |
| A31839 |
Biomek® NXP Span-8 Laboratory Automation Workstation (w/o Gripper)
The Biomek NXp Span-8 Laboratory Automation Workstation (w/o gripper) includes:
integrated purge pump, accuframe tool, side shields, span pod (less probes/ disposable tips),
syringe pumps (less glass syringes), Span-8 Passive Wash ALP, ship kit (cables etc.),
and starter kit (P/N 987260),and a sampling of Beckman Coulter consumables.
Includes side shield, rear shield, and front safety light curtain.
Must be ordered with Span-8 fixed Teflon coated tips for microplates (P/N 719807), or
Biomek Span 8 fixed Teflon tips for tubes (P/N 719809), or Biomek Span-8 fixed stainless
steel tips for microplates (P/N 719808), or Biomek Span-8 stainless steel tips for tubes
(P/N 719810), or Span-8 disposable tips (P/N 719811), Biomek Software (719349), Biomek
Syringes 250 µL (P/N 719814), or Biomek syringes 500 µL (P/N 719815), or Biomek syringes
1000 µL (P/N 719816), and Biomek Controller (P/N 987820) & monitor (P/N 978062),
as well as ALPs to complete this system. |
| A31840 |
Biomek® NXP Span-8 Laboratory Automation Workstation (w/ Gripper)
The Biomek NXp Span-8 Laboratory Automation Workstation (w/ gripper) includes:
integrated rotating gripper, purge pump, accuframe tool, side shields,
span pod (less probes/ disposable tips), syringe pumps (less glass syringes),
Span-8 Passive Wash ALP, ship kit (cables etc.), and starter kit (P/N 987260), and a
sampling of Beckman Coulter consumables.
Includes side shield, rear shield, and front safety light curtain.
Choose a Biomek Span 8 fixed Teflon tips for tubes (P/N 719809), or Biomek Span-8 fixed
stainless steel tips for microplates (P/N 719808), or Biomek Span-8 stainless steel tips
for tubes (P/N 719810), or Span-8 disposable tips (P/N 719811), Biomek Software
(P/N 719349), Biomek Syringes 250 µL (P/N 719814), or Biomek syringes 500 µL (P/N 719815),
or Biomek syringes 1000 µL (P/N 719816), and Biomek Controller (P/N 987820) & monitor
(P/N 978062), as well as ALPs to complete this system.
|
| A31841 |
Biomek® NXP Multichannel Laboratory Automation Workstation (with integrated Gripper)
The Biomek System Software is an-easy-to-use software program that directs all
instrument, and accessory functions. The software provides the ability to simply
and quickly create a method, review it, and then run it. Many functions related to
normal operation are intuitively provided. Tip loading, as an example, must be done for a
transfer to be accomplished. Simply configure the deck with the proper tips and the system
will load and unload tips when needed to perform the transfer. There is no need for
explicit control of tip loading and unloading. Similarly, by educating the system on the volume
of liquid in the labware, the level of that liquid can be tracked and used throughout the
method. User's Manual and Tutorials are included on the Software CD.
|
back to top
Biomek Software and Controller
| Part No. |
Description |
| 719349 |
Biomek Software - for programming and running all system activities for desired applications.
The Biomek® System Software is an easy-to-use software program that directs all instrument, and accessory functions.
The software provides the ability to simply and quickly create a method, review it, and then run it. Many functions related to
normal operation are intuitively provided. Tip loading, as an example, must be done for a transfer to be accomplished.
Simply configure the deck with the proper tips and the system will load and unload tips when needed to perform the transfer.
There is no need for explicit control of tip loading and unloading. Similarly, by educating the system on the volume of liquid in
the labware, the level of that liquid can be tracked and used throughout the method.
User's Manual and Tutorials are included on the Software CD. |
| 987820 |
Automation Controller, Windows XP |
| A16859 |
17" Flat Panel Monitor |
| A16170 |
Biomek Automation Controller XP with 17" Flat Panel Monitor and Biomek System Software |
| A16171 |
Biomek Automation Controller XP with 17" Flat Panel Monitor (Biomek Software not included) |
back to top
Additional Information:
|
