|
|
|
The following list contains a selection of devices that can be configured into a SAGIAN™ Core System that will meet a wide range of customer's application needs. These devices have standard software interfaces developed under our new advanced integration software technology, SILAS™. System operation is achieved through our state-of-the-art method interface and optimizing scheduling software, SAMI® NT. This level of standardization ensures fast set-up and unsurpassed system reliability.
|
|
ORCA® Robot Systems
|
|
The SAGIAN™ Optimized Robot for Chemical Analysis (ORCA®) systems include but aren't limited to:
Robot control software (ORCA® NT), Software Manuals, Mounting Kit, Emergency Stop Kit,
Teach Pendant, and Calibration Tool. An ORCA® can be configured on either 1, 2, or 3 meter rails offering
respective increases in effective work envelopes. We still offer ORCA® robots configured with
Windows 3.x/95* Method Development Software (MDS v. 2.5) in addition to ORCA®-NT.
|
| Part No. |
Description |
| 148287
|
1-Meter ORCA® System
|
| 267667
|
1-Meter ORCA® System with Automation Controller
|
| 148288
|
2-Meter ORCA® System
|
| 267668
|
2-Meter ORCA® System with Automation Controller
|
| 148289
|
3-Meter ORCA® System
|
| 267669
|
3-Meter ORCA® System with Automation Controller
|
|
|
|
|
Robot Control and Integration Software Options
|
|
|
| Part No. |
Description |
| 148015
|
ORCA® NT Software License
Included with ORCA® systems above.
|
| 147502
|
SILAS™ - Hardware-independent integration software
|
| 148047
|
ORCA® MDS 2.5 Software (for Windows 3.x/95 Systems)
|
|
|
|
|
|
SAMI® Software
|
|
SAGIAN® Automated Method Interface (SAMI® NT) software is used to create and edit automated
procedures on our laboratory robotics systems as well as manages measurement and historical data
generated during system operation. This software's intuitive graphical flowchart greatly facilitates the
the programming of assays. Where SAMI® Generations provides a fixed schedule assay protocol, SAMI® NT
includes a powerful new optimizing scheduler that automatically schedules assays and optimizes throughput.
|
| Part No. |
Description |
| 147500
|
SAMI® NT Core System Version
|
| 148680
|
SAMI® NT Version 2.x to 3.5 Field Upgrade (Includes Installation)
|
| 148588
|
SAMI® NT Version 3.x to 3.5 Field Upgrade (Includes Installation)
|
|
|
|
|
|
Automation PC Controller
|
|
|
| Part No. |
Description |
| 267656
|
Automation PC Controller with Windows NT* v. 4.0 and 17" Flat Panel Monitor
Configuration: IBM* 300 PL, Mini-tower version, Pentium* III, 500 MHz or Faster, 128 MB RAM,
13.5 GB Hard Drive; 1.44 MB Floppy Drive; 100 MB Zip Drive; 40X CD ROM, Mouse,
Keyboard, RS-232 Serial Ports (2); Parallel (1); 10/100 Ethernet Adapter, USB Ports (2), 6 Slots,
6 Bays; High Speed Comm Board; Flat Panel Color Monitor; Windows NT.
|
| 267689
|
Biomek® System Software and Automation Controller
Automation PC Controller with Windows NT v4.0 and 17" Flat Panel Monitor
Configuration: IBM 300 PL, Mini-tower version, Pentium III, 500 MHz or Faster, 128 MB RAM,
13.5 GB Hard Drive; 1.44 MB Floppy Drive; 100 MB Zip Drive; 40X CD ROM, Mouse,
Keyboard, RS-232 Serial Ports (2); Parallel (1); 10/100 Ethernet Adapter, USB Ports (2), 6 Slots,
6 Bays; High Speed Comm Board; Flat Panel Color Monitor; Windows NT.
Biomek® FX System Software v 2.5E
|
| A17304
|
Biomek® FX System Software v2.5E
|
|
|
|
|
|
System Upgrades
|
|
|
| Part No. |
Description |
| 267666
|
Core System NT Bundled Upgrade
Includes new ORCA® Control Module (OCM) assembly, OCM endcap and cable assemblies,
Computone serial card, Computone slimline card, ECM v. 2.0 firmware, hardware key;
Liquid Handler (Biomek or Multimek upgrade pkg.,) Automation Controller NT, 17" monitor;
SILAS software, SAMI® NT software, ORCA® NT software. Also includes Core System
installation and up to 2 days of on-site methods transfer assistance and application specific
training.
|
|
|
|
|
|
Supply Storage Devices
|
|
|
| Part No. |
Description |
| 147011
|
Hotel, 18-Shelf
|
| 147012
|
Hotel, 8-Shelf
|
| 147013
|
Hotel, 4-Shelf
|
| 147014
|
Microplate Carousel
|
| 147353
|
Tip Lift (Biomek®)
|
| 147355
|
Tip Lift Lid Disposal Unit
|
| 147369
|
Tip Lift, Biomek® Tip Box Option Kit
|
|
|
|
|
|
Incubation and Temperature Control Devices
|
|
|
| Part No. |
Description |
| 394933
|
Cytomat 6001 Incubator Kit
|
| 394934
|
Cytomat 2 C Incubator Kit
|
| 394935
|
Microplate Hotel Kit
|
| 379237
|
Cytomat 6XXX and Microplate Accessory Kit
|
| 394928
|
Cytomat 2 Accessory Kit
|
| 380703
|
Cytomat Stacks 21 MTP (23 mm)
|
| 380702
|
Cytomat Stacks 10 DW (50 mm)
|
| 380701
|
Cytomat Stacks 7 TipBoxes (69 mm)
|
| 147374
|
Tetrad Thermal Cycler Accessory Kit - For an existing Tetrad.
|
|
|
|
|
|
Plate Reading Devices and Accessory Kits
|
|
Accessory kits are required for the integration of an existing plate reader.
|
| Part No. |
Description |
| 148113
|
SPECTRAmax 190 Reader Kit
|
| 147027
|
SPECTRAmax 190 Accessory Kit
(No SoftmaxPro Interface. To use Softmax Pro with an integrated SpectraMax 190 use p/n 379245)
|
| 147362
|
Wallac TriLux Reader Kit
|
| 147373
|
Wallac Victor II Accessory Kit
|
| 147371
|
FLUOstar/POLARstar Galaxy Accessory Kit
|
| 147360
|
BMG LUMIstar Galaxy Reader Kit
The BMG Lumistar Galaxy Reader Kit includes a fully automated microplate reader that incorporates
both flash and glow luminescence, spectral range from 290-700 nm, up to 3 built-in hish-precision syringe
pumps, linear and orbital shaking, and incubation rage from ambient +5ºC to 45ºC.
Dimensions: 27 cm (H) x 44 cm (W) x 48 cm (L). Weight: 29.5 kg.
|
| 147372
|
Lumistar Galaxy Accessory Kit
|
| 147375
|
BMG Reader Fixture - Top Mount Option Kit
|
| 379245
|
Analyst HT & Acquest Core System Accessory Kit
The Analyst HT & Acquest Core System Accessory Kit includes all components necessary
to integrate a Molecular Devices Analyst or Acquest to a Core System operating on
SAMI® Version 3.0 or above. The kit inlcudes a base mounting plate with screws, digicable,
Analyst and Acquest SILAS™ Module, and the user's manual. Analyst or Acquest reader purchased
separately.
|
| 379080
|
SPECTRAmax Core System Accessory Kit
The SPECTRAmax Core System Accessory Kit includes all components necessary to
integrate a Molecular Devices SPECTRAmax to a Core System operating on SAMI®
Version 3.0 or above. The kit inlcudes a base mounting plate with screws, digicable,
SOFTmax PRO SILAS™ Module, and the user manual. SPECTRAmax readers and
SOFTmax PRO version 3.1.2 software purchased separately.
Limitations for SOFTmax PRO Pro with a SPECTRAmax Reader on a SAGIAN™
Core System and SOFTmax PRO with a SPECTRAmax Reader on a Biomek® 2000.
There are several limitations that may arise during the operation of SOFTmax Pro that are
beyond the control of SAMI® software and the SILAS™ SOFTmax Pro software module
produced by Beckman Coulter. Please contact your local Beckman Coulter representative on how
to manage these limitations.
|
| 380488
|
ArrayScan® II Integration Module & Accessory Kit
The ArrayScan® II Integration Module & Accessory Kit includes all components necessary
to integrate the ArrayScan® II to a Core System, operating on SAMI® Version 3.0 or above.
The kit inlcudes a base mounting plate with screws, serial cable, Twister microplate holder
assembly, ArrayScan II SILAS™ Module, and the user's manual. ArrayScan® II reader
purchased separately.
|
| 380491
|
ArrayScan® II Integration Manual
|
|
|
|
|
|
Plate-Washing/Dispensing Devices
|
|
|
| Part No. |
Description |
| 148646
|
Elx405 Select UV Plate Washer, 115 VAC (Bio-Tek, Inc.) - Includes instrument unit, dispensing bottles/tubing, valve module system, 115 VAC, waste collection system, and SAGIAN™ Core System accessory kit.
|
| 148647
|
Elx405 Select UV Plate Washer, 230 VAC (Bio-Tek, Inc.) - Includes instrument unit, dispensing bottles/tubing, valve module system, 230 VAC, waste collection system, and SAGIAN™ Core System accessory kit.
|
| 148668
|
Elx405 Select UV Washer SAGIAN™ Core System Accessory Kit (Bio-Tek, Inc.) - For integration of an existing stand-alone unit. Note: Standard Core System configuration only uses model number Elx405UV with waste collection system.
|
| 148111
|
Labsystems' MultiDrop 384
|
| 148112
|
Labsystems' MultiDrop 384 Accessory
|
|
|
|
|
|
Miscellaneous Plate Processing Stations
|
|
|
| Part No. |
Description |
| 147015
|
Bar Code Reader (120 V)
|
| 147018
|
Plate Shaker (6 position)
|
| 148222
|
Plate Shaker Upgrade Kit
|
| 147019
|
Plate Sealer
|
| 148638
|
Plate Sealer Upgrade Kit
|
| 147376
|
Clear Sealer Tape
|
| 147377
|
Cold Sealer/Storage Tape (DMSO Compatible)
|
| 147020
|
Lidding Station
|
| 148640
|
SAGIAN™ Microplate Print & Apply Kit - 110V
Includes the module, software, two rolls of printer ribbon for paper labels, one roll of paper
labels, two communication cables, and user manual. Requires 60 PSI compressed dry air.
|
| 148641
|
SAGIAN™ Microplate Print & Apply - 220V
Includes the module, software, two rolls of printer ribbon for paper labels, one roll of paper
labels, two communication cables, and user manual. Requires 60 PSI compressed dry air.
|
| 148642
|
Plastic Labels for the SAGIAN™ Microplate Print & Apply (qty. 1 roll)
Resistant to smearing and rugged to extensive handling. Suitable for cold storage at -20°C.
Label dimensions: 0.25 x 2.00 inches (0.64 x 5.08 cm). One roll contains 6,600 labels.
|
| 148643
|
Paper Labels for the SAGIAN™ Microplate Print & Apply (qty. 1 roll)
Appropriate for general purpose laboratory labeling requirements. Suitable for cold storage
at 20°C. Label dimensions: 0.25 x 2.00 inches (0.64 x 5.08 cm). One roll contains 6,600 labels.
|
| 148518
|
Printer Ribbon for Use in the SAGIAN™ Microplate Print & Apply with Plastic and Paper Labels - Two (2) rolls of ribbon are consumed with each roll of labels.
|
| 379087
|
ALPS 300 Integration Manual
|
|
|
|
|
|
Integration Accessories
|
|
|
| Part No. |
Description |
| 147016
|
Regrip Platform with Standoffs
|
| 147034
|
Biomek® 2000 Modified Tip Rack Holder
|
| 147033
|
Biomek® 2000 Modified Labware Holder
|
| 147359
|
Biomek® Positioning Kit
|
| 147039
|
1.0 m x 1.0 m Optical Platform
|
| 147032
|
1.0 m x 1.0 m Table
|
| 148062
|
Platform Teflon Sheeting (1ft/unit) - 4 units required per 1.0m x 1.0m platform.
|
| 147366
|
UPS (Monitored) Kit
|
| 147042
|
US Power Cord Kit
|
|
|
|
|
|
Biomek® 2000 Refillable Reservoirs
|
|
|
| Part No. |
Description |
| 147010
|
Biomek® Deck Controller
|
| 147017
|
Biomek® Deck Controller Kit - 4 (One Refillable Reservoir)
|
| 147022
|
1.0 L Kontes Refill Bottle (set of 5)
|
|
|
|
|
|
Manuals
|
|
|
| Part No. |
Description |
| 148048
|
MDS 2.5 Upgrade Addendum
|
| 148049
|
User's Guide: Lid Disposal Unit
|
| 147378
|
User's Guide: Plate Sealer
|
| 147379
|
User's Guide: Filtration Station
|
| 147380
|
User's Guide: CO(2) Incubator
|
| 147381
|
User's Guide: Carousel
|
| 147382
|
User's Guide: CS Incubator
|
| 147383
|
User's Guide: Lid Removal Station
|
| 147387
|
ORCA® Manual Kit
|
|
|
|
|
|
Integration Services
|
|
|
| Part No. |
Description |
| 267657
|
System Installation Hardware, Labor, and Orientation
|
| 267769
|
System Installation Hardware, Labor, and Orientation
Field Integration Kit for a Core Device - Travel and labor not included.
|
| 148017
|
Core System Field Integration Kit
|
| 267631
|
Core System Installation Labor, Hardware, Orientation - Includes admission for one person to attend SAMI® NT/ORCA® NT (4.5 days) training at SAGIAN™, Indianapolis, IN.
|
| 267768
|
Supplemental Integration Service (1 hour)
|
| 148639
|
Customer Expense Pass-through Allotment
|
|
|
|
|
|
Training Courses
|
|
|
| Part No. |
Description |
| 148464
|
2-Day SAMI® 3.0 Core System Advanced User Training at SAGIAN™, Indianapolis, IN - Without hotel accommodations.
|
| 148465
|
3-1/2 Days SAMI® 3.0 Core System User Training at SAGIAN™, Indianapolis, IN - Without hotel accommodations.
|
|
|
|
|
|
