|
|
|
Biomek® Systems
|
|
|
| Part No. |
Description |
| A31844
|
Biomek FXP Dual Arm System with Multi-Channel Pipettor and Span-8 Pipettors
Includes: front safety curtain with side shields, Eight (8) 1-mL Syringes, Fixed Tip Wash ALP
(P/N 719654), system installation and basic familiarization. Starter kit with Accuframe System and
system cable. For Span-8 Pipettor - - Must be ordered with Biomek FXP Span-8 Fixed Teflon-Coated
Tip for Microplates (P/N 719807), or Biomek FXP Span-8 Fixed Teflon Coated Tip for Tubes
(P/N 719809) or Biomek FXP Span-8 Disposable Tip Probes (P/N 719811), Waste (Span-8) ALP
(P/N 719590). For Multichannel Pipettor—Must be ordered with Biomek FXP 96-Channel Disposable
Tip Pipetting Head - 200 µL (P/N 719368) or Biomek FXP 384-Channel Disposable Tip Pipetting
Head - 30 µL (P/N 719715), Biomek FXP System Software (P/N 719349), Biomek FXP Disposable Tip
Loader ALP (P/N 719356), and ALPs (Automated Labware Positioners) to complete the application.
|
| A31842
|
Biomek FXP Single Arm System with Single Multi-Channel Pipettor
Includes: front safety curtain with side shields, system installation and basic familiarization.
Starter kit with Accuframe System and system cable. Must be ordered with Biomek
96-Channel Disposable Tip Pipetting Head - 20 µL (P/N 719367) or Biomek 96-channel
disposable tip pipetting head - 200 µL (P/N 719368), Biomek System Software
(P/N 719349), Biomek Disposable Tip Loader ALP (P/N 719356) , and ALPs
(Automated Labware Positioners) to complete the application.
|
| A31845
|
Biomek FXP Dual Arm System with Dual Multi-Channel Pipettors
Includes: front safety curtain with side shields, system installation and basic familiarization.
Starter kit with Accuframe System and system cable. Must be ordered with Biomek
96-Channel Disposable Tip Pipetting Head - 20 µL (P/N 719367) or Biomek 96-channel
disposable tip pipetting head - 200 µL (P/N 719368), Biomek System Software
(P/N 719349), Biomek Disposable Tip Loader ALP (P/N 719356) , and ALPs
(Automated Labware Positioners) to complete the application.
|
| A31840
|
Biomek NXP Span-8 Laboratory Automation Workstation (w/ Gripper)
The Biomek NXP Span-8 Laboratory Automation Workstation (w/ gripper) includes:
integrated rotating gripper, purge pump, accuframe tool, side shields,
span pod (less probes/ disposable tips), cavort syringe pumps (less glass syringes),
Span-8 Passive Wash ALP, ship kit (cables etc.), and starter kit (P/N 987260),and a
sampling of Beckman Coulter consumables.
Includes side shield, rear shield, and front safety light curtain.
Biomek Span 8 fixed Teflon tips for tubes (P/N 719809), or Biomek Span-8 fixed stainless
steel tips for microplates (P/N 719808), or Biomek Span-8 stainless steel tips for tubes
(P/N 719810), or Span-8 disposable tips (P/N 719811), Biomek System Software (P/N 719349),
Biomek Syringes 250 µL (P/N 719814), or Biomek syringes 500 µL (P/N 719815), or
Biomek syringes 1000 µL (P/N 719816), and Biomek Controller (P/N 987820) & monitor
(P/N 978062), as well as , ALPs to complete this system.
|
| A31841
|
Biomek NXP Multichannel Laboratory Automation Workstation (with integrated Gripper)
Includes: front safety curtain with side shields, system installation and basic familiarization,
starter kit with Accuframe System and system cable. Must be ordered with Biomek 96-Channel
Disposable Tip Pipetting Head - 50 µL (P/N 719367), Biomek 96-Channel disposable tip pipetting
head - 200 µL (P/N 719368), or Biomek 384-channel pipetting head - 30 µL, Biomek System
Software (P/N 719349), Biomek Disposable Tip Loader ALP (P/N 719356), and ALPs (Automated
Labware Positioners) to complete the application.
|
| 719367
|
Biomek 96-Channel Disposable Tip Pipetting Head (50 µL)
Pipetting head configured for AP96 P20 or P250 tips, for the Biomek Multi-Channel Pipettor with a volume range of 1 to 50 µL.
|
| 719368
|
Biomek 96-Channel Disposable Tip Pipetting Head (200 µL)
Pipetting head configured for AP96 P20 or P250 tips, for the Biomek Multi-Channel Pipettor with a volume range of 5 to 200 µL.
|
| 719715
|
Biomek 384-Channel Disposable Tip Pipetting Head (30 µL)
|
| 719807
|
Biomek Span-8 Fixed Tip Teflon Coated (Microplate) Qty 8. Holds 60 µL and is suitable for use with microplates and deepwells.
|
| 719808
|
Biomek Span-8 Fixed Tip 316 Stainless Steel (Microplate) Qty 8. Holds 60 µL and is suitable for use with microplates and deepwells.
|
| 719809
|
Biomek Span-8 Fixed Tip Teflon Coated (Tubes) Qty 8. Holds 100 µL and is suitable for use with test tubes up to 100 mm in height.
|
| 719810
|
Biomek Span-8 Fixed Tip 316 Stainless Steel (Tubes) Qty 8. Holds 100 µL and is suitable for use with test tubes up to 100 mm in height.
|
| 719811
|
Biomek Span-8 Disposable Tip Qty 8. This tip configured for use with AP96 P20 or P250 disposable tips.
|
|
|
|
|
SAMI® Workstation EX Software
|
|
|
| Part No. |
Description |
| 394257
|
SAMI® Workstation Ex Software (Software Only)
|
| A22203
|
SAMI Workstation EX Software (Includes SAMI, Biomek Software, Controller, 17" Monitor)
Automation PC Controller with Windows XP and 17" Flat Panel Monitor
Configuration: IBM M50 MiniTower, Pentium 4 (2.6GHz or Faster), 1GB RAM, 40GB Hard Drive, 1.44 MB Floppy
Drive, 48x24x48 CD R-RW Drive, 9 RS-232 Serial Ports, 1 Parallel Port, 10/100 Ethernet Adapter, 6 USB Ports,
4 Slots, 5 Bays, High Speed Communication Board (Digi), Mouse & Keyboard
Microscot Windows XP Professional. Ghost 7.5 Imaging Software, Microsft SQL Server Personal Edition
|
| A21647
|
SAMI Workstation EX Software Conversion (Includes Software Upgrade, Controller and Monitor)
|
|
|
|
|
|
Workstation Upgrade Kits
|
|
|
| Part No. |
Description |
| 394724
|
Workstation Installation Kit
Includes: Digiboard and framing tools for PowerWave, SpectraMax series, and ELx405 devices.
|
| 394721
|
Workstation BFX Upgrade Kit (for SN <5011833)
This kit is designed for the Biomek FX Dual Arm System with Span-8 Pipettor and
Multichannel Pipettor and Integrated Gripper System; contains manifold kit, pump lift kit,
acrylic side shields, and left deck plate.
|
| 391213
|
Workstation BFX Upgrade Kit without Manifold (for SN 5011833 and higher)
This kit is designed for the Biomek FX Dual Arm System with Dual Multi-channel Pipettors
and Integrated Gripper System; contains pump lift kit, acrylic side shields, and left deck plate.
|
| 391223
|
Workstation BFX Upgrade Kit, Multichannel
This kit is designed for the Biomek FX Single or Dual Arm System with Dual Multi-channel
Pipettors and Integrated Gripper System; contains acrylic side shields, and left deck plate.
|
|
|
|
|
|
Automated Labware Positioners (ALPs)
|
|
|
| Part No. |
Description |
| 719366
|
Biomek Device Controller
Includes Biomek device controller module, CAN communications cable. The Biomek
device controller module is design to supply seven (7) digital input and outputs to control
digital devices on the Biomek work area. The Biomek software controls the devices
through the Biomek device controller module.
|
| 719356
|
Biomek Disposable Tip Loader ALP
The Biomek Disposable Tip Loader ALP provides automated loading and unloading of
all types of AP96 and AP384 P30 disposable tips for the Biomek 96 and 384 channel
pipettors. The tips are loaded via pneumatic pressure for reliable loading, thereby
minimizing the stress on the pipetting system. Includes automated tip loader, tubing, and
CAN communications cable. Requires: 40 PSI clean dry air, 2.5 cfm. Maximum of 4 Tip
Loaders may be integrated onto the Biomek work area.
|
| 719363
|
Biomek Disposable Tip Wash ALP 96-Channel
Includes wash station, wash pump, supply tank, and drain/waste tank, ALP platform.
Tip Wash ALPs can be configured in the outer most columns and back row of instrument.
NOTE: Requires Biomek Device Controller (P/N 719366).
The Biomek Disposable Tip Wash ALP 96-Channel is controlled by the Biomek
System Software via the by the Biomek Device Controller. The washes can be manually
configured or automatically configured. The Tip Wash ALP provides a constant flow of
liquid into 96 individual channels to wash the exterior of the pipetting tip. The inside of the
tip is washed by aspirating and dispensing from the flow of liquid. The tip wash ALP
reduces running costs by curtailing or eliminating the use of tips. Multiple tip wash ALPs can
be configured for differing liquids or for specific pipettors.
|
| 719820
|
Biomek Tip Wash 96 Channel - Manifold Only
|
| 719622
|
Biomek Disposable Tip Wash ALP 384-Channel
Includes wash station, wash pump, supply tank, and drain/waste tank, ALP platform.
Tip Wash ALPs can be configured in the outer most columns and back row of instrument.
NOTE: Requires Biomek Device Controller (P/N 719366).
The Biomek Disposable Tip Wash ALP 384-Channel is controlled by the Biomek
System Software via the by the Biomek Device Controller. The washes can be manually
configured or automatically configured. The Tip Wash ALP provides a constant flow of
liquid into 384 individual channels to wash the exterior of the pipetting tip. The inside of the
tip is washed by aspirating and dispensing from the flow of liquid. The tip wash ALP reduces
running costs by curtailing or eliminating the use of tips. Multiple tip wash ALPs can be
configured for differing liquids or for specific pipettors.
|
| 719821
|
Biomek Tip Wash 384 Channel - Manifold Only
|
| 719654
|
8-Channel Tip Wash ALP
For washing Biomek Fixed Tips. Includes drain/waste tank and ALP platform. Can be located in the
outermost columns and back row of instrument. NOTE: Uses system liquid for rinsing via syringe pumps.
Faster washing can be provided using the optional Biomek Speed Pump (P/N 719653). The Tip
Wash ALP provides individual cavities where system liquid flows through each of the eight channels
to clean the interior of the tips. The exterior of the tips are cleaned as the system liquids overflows
each cavity. Multiple tip wash ALPs can be configured for differing liquids or for specific pipettors.
|
| 719357
|
Standard Single-Position ALP
Includes single-position ALP for positioning of one (1) standard 96 and/or 384 well
microtiter plates as singles or in stacks with spacing to support Biomek gripper and/or
robotic manipulation. The single position ALP can be placed in any open position.
|
| 719358
|
Standard Three-Position ALP
Includes three-position ALP for positioning of three (3) standard 96 and/or 384 well microtiter
plates as singles or in stacks with spacing to support Biomek gripper and/or robotic manipulation.
The three-position ALP can be placed in any column in the work area with the front three rows open.
|
| 719347
|
Waste ALP
Includes waste ALP, chute, and disposable bags. The waste ALP chute is for the disposal of full
or empty tip racks and microtiter plates from the work area of the Biomek . The removal of the
chute and the addition of the disposal bags will provide of the disposal of 7 heads of tips without
their racks into the waste disposal bag. ALP requires a single position in the outer columns
in rows 2 or 3 of the Biomek work area.
|
| 719590
|
Waste (Span-8) ALP
Includes waste ALP, chute, and disposable bags. The waste ALP chute is for the disposal of
full or empty tip racks and microtiter plates from the work area of the Biomek . The removal
of the chute and the addition of the disposal bags will provide of the disposal of 7 heads of
tips without their racks into the disposal bag. The waste ALP requires a single position in the
outer columns in rows 2 or 3 of the Biomek work area.
|
| 719361
|
Biomek Cooling/Heating ALP, Single-Position
Includes single-position cooling and heating ALP. Positionable in any location on the Biomek
work area. User must supply reservoirs and a circulator bath with the following minimum specifications:
Range: -20°C to 100°C; Flow Capacity: 7–15 L/minute; Max Pressure: 2.1 PSI; Reservoir Capacity:
6 L; Heating Capacity: 1,000 W; Cooling Capacity: 120 W at 0°C.
|
| 719352
|
Biomek Shaking ALP (Linear), Single-Position
Includes single-position linear shaking ALP, CAN communications cable. Positionable in any
location on the Biomek work area.
|
| 379448
|
Biomek Shaking ALP (Orbital), Single-Position
Includes single-position orbital shaking ALP, CAN communications cable. Positionable in any
location on the Biomek work area.
|
| 719346
|
Biomek Stirring ALP, Single-Position
Includes single-position magnetic stirring ALP, CAN communications cable. Positionable in any
location on the Biomek work area. Magnetic stir bar not included.
|
| 148026
|
Circulating Reservoir Single Kit (110 V)
The Circulating Reservoir for the Biomek provides a continuous supply of buffer,
solvent, or reagent on the Biomek worksurface. A peristaltic pump circulates liquid
between a 96-well reservoir on the Biomek work area and a glass supply bottle. The
reservoir can be placed at any available position on the work area. Liquid temperature can
be regulated by placing the supply bottle in a user-supplied heating or cooling apparatus.
Includes: Circulating pump and two pump heads, 1.1 L supply bottle (148028), delivery cap
(148030), 96-well reservoir for Biomek Worksurface, Tygon and PharMed tubing, and
manual. NOTE: Requires Biomek Device Controller (P/N 719366).
|
| 394134
|
Biomek Span-8 Active Wash Kit (110V)
Requires Biomek 3.1 and above software
|
| 719359
|
Standard Five-Position ALP
Includes five-position ALP for positioning of five (5) standard 96 and/or 384 well microtiter
plates as singles. The five-position ALP DOES NOT support Biomek FX gripper and/or robotic
manipulation. The five-position ALP can be placed in any column in the work area with all
rows open.
|
| 719948
|
High-Density Twelve-Position 4x3 ALP
Includes twelve-position ALP for positioning of twelve (12) standard 96 and/or 384 well
microtiter plates as singles or in stacks with spacing to support Biomek FX gripper
manipulation. The twelve-position covers the entire work area excluding the outer columns.
|
| 719360
|
High-Density Sixteen-Position ALP
Includes sixteen-position ALP for positioning of sixteen (16) standard 96 and/or 384 well
microtiter plates as singles or in stacks with spacing to support Biomek FX gripper
manipulation. The sixteen-position covers the entire work area excluding the outer columns.
|
| 719856
|
Positive Positioning ALP
Includes Positive Positioning ALP and CAN communications. Provides automated
clamping and positioning of 1,536-well plates for access by the Biomek FX
384-Channel Pipettors. The plates are clamped by a solenoid for reliable pipetting
operations. The clamp is relaxed during non-use periods, thereby reducing potential
heat build up. Multiple Positive Positioning ALPs may be integrated onto the
Biomek FX work area as needed.
|
| 989839
|
Biomek NX Span-8 4x3 ALP Kit
Biomek NX Span-8 4x3 ALP Kit is designed specifically for use on the Biomek NX Span-8.
The 4x3 ALP's positions are slightly more compact than that of the regular Biomek FX/NX
Multichannel 4x3 ALP. This ALP is used with the Biomek NX Span-8 if additional
deck space is required.
CANNOT be used with Biomek FX or Biomek NX Multichannel Systems
|
| 989778
|
Biomek NX Half Trash ALP Kit
Designed to occupy only half of a regular single deck position. Ideally for use with the Span-8
Wash Station. Combined , the Span-8 Wash Station (P/N 719654) and the Half Trash ALP only
occupy a single deck position saving valuable space for other ALP functions.
|
|
|
Additional ALPs can be found on the Biomek FX or Biomek NX Price List
|
|
|
|
|
|
Workstation Readers
|
|
|
| Part No. |
Description |
| 719856
|
DTX 880 Detector and Workstation Kit
Modes: Fluorescence Intensity (top & bottom read), Absorbance (UV & Visible),
Luminescence (Glow), Time-Resolved Fluorescence, Fluorescence Polarization
Integrated Shaking & Temperature Control
Excitation Filters: Abs 260nm, 340nm, 405nm, 450nm, 595nm, 620nm Fl. 485nm, 535nm,
TRF 370nm, FP 485nm
Emission Filters: Fl. 535nm, 595nm, 625nm FP 535nm
Multimode Detection Software, Power Cable, RS232 Serial Cable, Instrument and User's Manual
Compatible with 6-, 24- 96-, & 384-well plates
Integration Hardware: Installation
|
| A20414
|
DTX 800 Detector and Workstation Kit
Modes: Fluorescence Intensity (top read), Absorbance (Visible), Luminescence (Glow)
Integrated Shaking:
Excitation Filters: Abs 405nm, 450 nm, 492 nm, 620 nm Fl. 360nm 485nm
Emission Filters: Fl. 465nm, 535nm
Multimode Detection Software, Power Cable, RS232 Serial Cable, Instrument and User's Manual
Compatible with 96- & 384-well plate formats
Multimode Detection Software, Power Cable, RS232 Serial Cable, Instrument and User's Manual
Installation Hardware
|
| A20048
|
DTX Series Integration Kit for the Biomek FX, NX & AWS
|
| A18181
|
Compact 1x1 ALP (for Biomek NX MC Only)
|
|
|
|
|
|
Workstation Washers
|
|
|
| Part No. |
Description |
| 394591
|
ELx405UV Select Plate Washer
The ELx405 is the perfect washer for Cell-based Assays. It features unique x, y, and
z positioning for superior aspiration. The patented dual-action manifold has been designed
for both 96- and 384-well formats. In addition, you have the flexibility to adjust both the
aspiration and dispense speeds to ensure gentle washing.
|
| 394590
|
ELx405 Workstation Kit
|
|
|
|
|
|
Workstation Storage & Incubation
|
|
|
| Part No. |
Description |
| 394597
|
Cytomat Microplate Hotel HS System Ambient and Workstation Kit
|
| 394596
|
Cytomat Microplate Hotel Workstation Kit
|
| A21753
|
Cytomat Microplate Hotel HS System Ambient and Short ALP Workstation Kit
|
| A21593
|
Cytomat Microplate Hotel Short ALP Workstation Kit
|
| 394712
|
Cytomat 2C Incubator Ambient +8º to 50ºC and Workstation Kit
|
| 394709
|
Cytomat 2C Incubator Workstation Kit
|
| A21754
|
Cytomat 2C Incubator & Workstation Kit (w/Short ALP)
|
| A21592
|
Cytomat 2C Incubator Short ALP Workstation Kit
|
| 394701
|
Cytomat 6001 HS Incubator +10º to 50ºC and Workstation Kit
|
| 394599
|
Cytomat 6001 HS Incubator Workstation Kit
|
| A21755
|
Cytomat 6001 HS Incubator +10º to 50ºC and Short ALP Workstation Kit
|
| A21591
|
Cytomat 6001 HS Incubator Short ALP Workstation Kit
|
| 380703
|
Cytomat Stacks 21 MTP (23 mm)
|
| 380702
|
Cytomat Stacks 10 DW (50 mm)
|
| 380701
|
Cytomat Stacks 7 TipBoxes (69 mm)
|
| 394509
|
Cytomat ALP w/ Bar Code Reader - Cytomat Transfer ALP w/ Bar Code Reader
|
|
|
|
|
|
Integration Services
|
|
|
| Part No. |
Description |
| 394798
|
On-Site AWS & CORE Installation Management and Training - Upgraded Systems
|
| 267657
|
On-Site AWS & CORE Installation Management and Training
|
| 267692
|
1-Day Project Manager Biomek Training
|
| 267768
|
Supplemental Integration Service (1 hour)
|
| 148639
|
Customer Expense Pass-through Allotment
|
| 349923
|
Biomek Assay Workstation SAMI Workshop (2 days)
|
|
|
|
|
|
