|
|
|
Nucleic Acid
eCAP™ dsDNA 20,000 Kit
Part No. 477486
|
|
The eCAP™ dsDNA 20,000 Kit provides coated capillarires with all the necessary reagents, standards, and instructions to perform large fragment (up to 20,000 bp) nucleic acid separations. For analysis of double-stranded DNA with linearity from 1,000 to 20,000 base pairs. Includes application disk, coated capillaries (2), replaceable gel, and standards to perform at least 100 runs.
|
| Part No. |
Description |
| 477477
|
eCAP™ DNA Capillary - 100 µm ID, 65 cm total length (quantity 1).
|
| 477485
|
eCAP™ dsDNA 20,000 Gel Buffer (pack of 3)
|
| 477483
|
eCAP™ Orange G Reference Marker
|
| 241524
|
eCAP™ Orange G Reference Marker
|
|
|
|
|
eCAP™ dsDNA 1000 Kit
Part No. 477410
|
|
For DNA fragment pattern recognition, quantitation of PCR* fragments, and molecular sizing determinations. Typical resolution for fragments less than 400 base pairs is 5-15. Molecular size linearity from 100 to 1000 base pairs. The kit includes a coated capillary and replaceable gel, test mix and an internal standard to perform at least 100 runs. For analysis of double-stranded DNA with linearity from 100 to 1,000 base pairs. Includes application disk, coated capillaries (2), replaceable gel, and standards to perform at least 100 runs.
|
| Part No. |
Description |
| 477477
|
eCAP™ DNA Capillary • 100 µm ID, 65 cm total length (quantity 1).
|
| 477628
|
eCAP™ ssDNA 1000 Gel Kit (pack of 3)
|
| 477414
|
eCAP™ dsDNA 1000 Test Mix
|
|
|
|
|
|
Flourescene Intercalator
|
|
|
| Part No. |
Description |
| 477409
|
eCAP™ EnhanCE Dye 0.5 mL
|
|
|
|
|
|
eCAP™ ssDNA 100-R Kit
Part No. 477480
|
|
For analysis of single-stranded DNA with linearity from 10 to 100 bases. Includes application disk, coated capillaries (2), replaceable gel, and standards to perform at least 100 runs. UV detection is required to analyze unlabeled and standard oligonucleotides. Urea denaturant is included separately, enabling a naturing replaceable gel, if desired. For analysis of single-stranded DNA from 10 to 100 bases.
|
| Part No. |
Description |
| 477477
|
eCAP™ DNA Capillary - 100 µm ID, 65 cm total length (quantity 1).
|
| 477621
|
ssDNA 100-R Gel Kit
|
| 338481
|
eCAP™ ssDNA 100 Buffer Kit - Includes Tris borate buffer (2), Urea, 7 M (2).
|
|
|
|
|
|
Small Molecules
P/ACE™ System MDQ Highly Sulfated Cyclodextrins
|
|
Recommended for use only with P/ACE System MDQ because of the high current running conditions.
|
| Part No. |
Description |
| 149869
|
Highly Sulfated Cyclodextrin Trial Kit - Consists of 5 mL each of the three HS Cyclodextrins; Test Mix; Marker; Conditioning Solution; and Phosphate Buffer.
|
| 713348
|
HS Alpha Cyclodextrin (5 mL)
|
| 713349
|
HS Alpha Cyclodextrin (100 mL)
|
| 713331
|
HS Beta Cyclodextrin (5 mL)
|
| 713347
|
HS Beta Cyclodextrin (100 mL)
|
| 713350
|
HS Gamma Cyclodextrin (5 mL)
|
| 713351
|
HS Gamma Cyclodextrin (100 mL)
|
| 713330
|
HS Cyclodextrin Test Mix
|
| 713328
|
PTS Marker (1 mL @ 10 mMolar)
|
| 713333
|
Capillary Conditioning Solution (10 mL)
|
| 477422
|
Phosphate Buffer, pH 2.5 (qty. 50 mL)
|
|
|
|
|
|
P/ACE™ System MDQ Chiral Methods Development
Part No. 501300
|
|
To be used for rapid development in the analysis/quantitation of chiral compounds. Repackaged for System MDQ. Consists of 2 neutral capillaries, high pH buffer, low pH buffer, adjustable pH buffer, beta-cyclodextrin, gamma-cyclodextrin, HP-beta-cyclodextrin, and DM-beta-cyclodextrin, Test Mix, Methods Development Guide, Chiral Methods Development Flow Chart, and Buffers Dilution Guide.
|
| Part No. |
Description |
| 477441
|
ProteomeLab™ Neutral Coated Capillary - 50 µm I.D.x 45 cm total length.
|
| 477449
|
Chiral Kit High pH Buffer (500 mL)
|
| 477448
|
Chiral Kit Low pH Buffer (500 mL)
|
| 477447
|
Chiral Kit Adjustable pH Buffer (500 mL)
|
| 477469
|
Chiral Kit Test Mix (1 mL)
|
| 477437
|
Beta-cyclodextrin (25 g)
|
| 477438
|
Gamma-cyclodextrin (25 g)
|
| 477467
|
Dimethyl-beta-cyclodextrin (25 g)
|
| 477470
|
Hydroxypropyl-beta-cyclodextrin (25 g)
|
|
|
|
|
|
eCAP™ Amine Capillary Methods Development Kit/Small Molecules
Part No. 477430
|
|
When basic compounds “stick” to the slightly anionic surface of a fused silica capillary, the amine capillary may be the solution. The surface of the amine capillary has been modified with a polyamine to producea strong cationic charge which reverses the direction of electroosmotic flow and minimizes the potential for basic analyte interactions with the capillary wall. Expect reduced separation times, improved resolution and efficiency and simplified methods development. The kit contains two amine capillaries and regenerator solution, buffers, micellar agents, test mix and a marker to perform at least 200 runs. For basic compounds that require a fast EOF and a cationic capillary surface.
Kit includes:
|
| Part No. |
Description |
| 477431
|
eCAP™ Amine Capillary - 50 µm ID, 65 cm total length (quantity 1).
|
| 477432
|
eCAP™ Amine Capillary - 75 µm ID, 65 cm total length (quantity 1).
|
| 477425
|
Acetate Buffer, pH 4.5
|
| 477426
|
MES Buffer, pH 6.0
|
| 477427
|
Tris Buffer, pH 8.0
|
| 477422
|
Phosphate Buffer, pH 2.5 (qty. 50 mL)
|
| 477423
|
Phosphate Buffer, pH 7.0
|
| 477428
|
TTAB (Micellar Agent)
|
| 477429
|
Triton X-100, Micellar Agent
|
| 477433
|
Amine Regenerator Solution
|
| 477421
|
Small Molecule Test Mix
|
| 477434
|
Neutral Marker
|
|
|
|
|
|
eCap™ Carbohydrate Labeling Kit
Carbohydrate Labeling and Analysis Chemistries
Part No. 477600
|
|
Requires 488 nm Argon LIF Dectector on P/ACE 2000-5000 or P/ACE MDQ
The eCAP™ Carbohydrate Labeling Kit provides a highly automated separation and detection of N-linked oligosacchrides. Kit includes the necessary labeling reagent (APTS), eCAP™ N-CHO capillary (2), buffers, standards, and test mix.
Kit includes:
|
| Part No. |
Description |
| 477601
|
ProteomeLab™ N-CHO Capillary 50 µm I.D. x 65 cm total length
|
| 477623
|
N-Linked Gel Buffer
|
| 501309
|
APTS Labeling Dye, 2 x 5 mg
|
| 725898
|
APTS-M Grade, 21 mg - For monosaccharide analysis
|
|
|
|
|
|
